-
TLA4211 doesn't power up
Hi all, I have 4 TLA4211, and all of them have the same issue, which is they're completely dead. No lights at all when I plug them in. Can anyone suggest how to fix them?
-
No VOIP tab on my VMG8924-B10A
I am trying to use this modem/router for making VOIP calls, but upon opening the setup interface there is no VOIP tab and I cannot find where to initiate it when reading the latest manual. Although it shows the VOIP tab in the instructions. I've updated the firmware and still no VOIP tab. I've also trawled the web for more…
-
Who Need a VPN TCP or UDP, This Site Provides It For Free
-
Последняя прошивка для Keenetic Lite.
У моего Keenetic Lite стоит прошивка V1.00(AABL.1.4)D0 30-мая-2012. Есть ли прошивка посвежее? Поделитесь ссылкой.
-
Zyxel VMG3925
About the wireless guest. Is it normal that when "Guest WLAN" is active devices on that wireless network can't be contacted from outside even it they are on DMZ or port forwarding is set?
-
Zyxel PK5001Z blocking an ethernet device
I am fairly noobish at networking. I'm gonna try to explain this the best i can. I am trying to upgrade from the Westell 7500 modem router to the Zyxel pk5001z that my isp century link provided. the problem is I have this device called a "dreampi". This is basically a raspberry pi with a fax modem connected to it that…
-
Smart devices
Greetings. I was forced to reset (lost password) and now I can't get my smart outlets re-connected. I had on trouble reconnecting my amazon echo devices and my security cameras. Ed Model: EMG3425Q10A
-
Discusion disapeared
Good afternoon, I have written my firs discussion but after editting it twice (writing mistakes) there has appeared a meassage saying that it had to be reviewed. In any case, at my user area says that I have not started any discussion. Should I write it again or will it appear later? Thank you! #Other_May_2020
-
Unstable network with PLA5456
We have for several years used homeplugs for our home-LAN. Four D-lan 650+ gave us a bit slow but stable network. We have two work areas, one in the same room as we have internet router so we are connected directly into the router. For this computer I measure about 80 Mbit/s on the internet connction. The other work area…
-
How can I find the router password if the default and reset is not working
I have reset the VMG1312-B10D Router but the default password is still not working. What is the fix for this problem.
-
PLA5236 terrible download, perfect upload
Hello, I've a pretty weird issue with my PLA5236+PLA5256 (connected to modem). If I turn off my PLA5236 and subsequently turn it on, for a few minutes the download speed is perfect, 50Mbs, with very low losses. But then after just a few minutes the speed decreases to max 7Mbs and remains constant for days. This happens all…
-
Issue with Wireless connectivity on PLA5236
Hi, I received a PLA5236 four days ago bought and all was fine the first day but the day
after it required to upgrade to the last firmware release V1.00(ABFB.4)C0. Since the firmware upgrade the wireless
connectivity is not working anymore: we can connect during the first 5 minutes
after the PLA5236 startup and then it is…
-
Parental control not working
I have set a parental control on a single device (now tv box) to only have internet access between 0600 and 2100 on my VMG8924. However as soon as I activate this control, it blocks the internet at all times on that device. Any ideas why it’s doing this and not just restricting internet access after the specified time??
-
USB support
The model number of the product I have is EMG6726-B10A. I tried plugging a external hard drive into the USB port wanting to use it as a home nas. I went into settings and I could not figure out where to configure the drive. I then read the user manual and figured out that the USB port does nothing yet and that it is for…
-
Router log shows Received INFORM
Hello, just wondering if anyone has experienced this before? Any idea what this means? The router has been provided by Post Office Broadband and I am unsure if I am able to upgrade the firmware. I am currently on v3.00(ABCG.12)T0.
-
Zyxel vmg1312 IP address change
Hi, Totally new to the forum and looking for some set up help. Recently purchased the VMG1312 as a replacement for a Vigor130 which was a nightmare in bridge mode, constantly dropping out, and this Zyxel had some good reviews. Anyway the modem has an address of 192.168.1.1 and this is exactly the same IP address as our…
-
Locked out of VMG3925
I have the VMG3925-B10C. It was on firmware V5.13(AAVF.12)C0. The 5GHz wi-fi had been cutting out once every couple of days or so. I had seen around here that the B10B has possibly had this fixed in a newer firmware and I gathered they use the same firmware anyway so I thought I'd try that It got stuck in the self-test for…
-
Change Wan Priority on VMG8825-B50B
Hi all, i need to configure a VMG8825-B50B [ Firmware VMG8825-B50B_5.13(ABNY.4)C0 ] for VDSL bridge mode without lost VOIP connectivity. Router B is a router that has his WAN interface connected on the Eth4 port 4 of the Zyxel I'm testing this configuration: - Broadband VDSL in ptm bridge mode on the zyxel - Group…
-
PLA5206 v2 - inconsistent connection
Hello. I have this powerline adapter, but i'm experiencing very big lag spikes. On one side it's connected to my main router and on the other, to a zyxel 418n v2 which is working as an AP. I have 2 computers connected to it and they both experience the same thing. This is the first one, which is a windows server: and the…
-
PLA5236 not working when additional PLA5256 is plugged in
Hello, I've a weird issue with PLA5236. At the moment my network consists in: - PLA5256 connected to my modem through ethernet cable - PLA5236 as wifi extender, that always worked well. Now I added a second PLA5256 connected to an access point, so that i can further expand my network on the second floor. My issue is: as…