-
Is it possible to use the PLA4231 as an adapter?
I bought two PLA4231 extenders by mistake, instead of one PLA4231 extender and one PLA4201 adapter. Could use the second PLA4231 extender as a PLA4201 adapter? #PLA_Mar_2019
-
How to add a 3rd PLA5456 to current devices
I recently purchased a new PLA5456 and I want to add it to the two PLA5456 units I have already deployed. When I plug it in and preset the reset/encryption button it ends up as a red light. I think I'm doing something wrong. Can you please post the directions to add a 3rd unit to a pair that are already in service.…
-
How to disable unnecessary firewalls
my upload speed should be 25mb but im only getting 1mb on my xbox, my laptop and phone is all fine. xbox reccommends contacting my router to find out how to disable unnecessary firewalls #Others_Apr_2019
-
VMG3925-B10B V11 and V12 problems
Hi, I have revision 11 firmware on my VMG3925-B10B and find I cannot create a backup of the configuration any reason why this should be? I click on BACKUP and the Zyxel window goes black and I wait and nothing happens and the only thing that works is logging out. Also, updating to revision 12 updates and functions, but I…
-
How can my Zyxel VMG8823-B50B communicate to a client OpenVPN the new external IP when it changes
How can my Zyxel VMG8823-B50B communicate to a client OpenVPN the new external IP when it changes #CPE_Mar_2019
-
Connessione remota
Non riesco a configurare il modem in modo da poter vedere il mio hard disk collegato alla porta USB in via remoto Qualcuno può aiutarmi? #Others_Apr_2019
-
WRE2205 v2 Reset
Hi All. I have three WRE2205 v2s here. One of them will reset by holding down the WPS button for 10 seconds. The other two will not, and seeing as I have no way of knowing their IP addresses, I can't login to them to reset them through the GUI. Help! Is there another way to factory reset them? #Repeater_Mar_2019
-
VMG1312-B10D with V5.13(AAXA.7)C0 firmware can't upgrade to V5.13(AAXA.8)C0
When I attempt to upload the new firmware I get this: Why and how do I get round this? #CPE_Oct_2018
-
iOS configuration software for powerline adapters
Looking for some advice. I have a number of older 4 port 500mb Zyxel powerline adapters and wanted to add two new adapters so picked up a pair of PLA5256 two port adapters. Got them all on a powerstrip and sync'd up, but no software seems to exist for iOS to configure the old or newer versions.....any ideas? Secondly, the…
-
PLA5256 does not deliver full bandwidth
I don't understand how i can get 500/500 Mbps from a direct connection to my router, but on the powerline i get around 170 Mbps. They are like 5 meters apart from each other. Anyone knows why? #PLA_Mar_2019
-
PLA5456 LAN only
Can the PLA 5456 be used as a local network and not be connected to the internet? I need it to access a printer about 200 yards away but we have no internet access at this facility #PLA_Mar_2019
-
Zyxel VMG1312-B10A admin password was remotely changed: please help.
This has happened twice in the last couple of days (I had to reset to factory defaults each time). I've now updated to the latest firmware, but I'm somewhat reluctant to start using it again. Will the latest firmware updates cure this vulnerability (if indeed it was a router problem and not something else??) I'm running…
-
Connect to ZYXEL VMG8823 a WiFi tplink to extend signal
Hello to the whole communityI have a ZYXEL VMG8823 to which I want to connect a TL-MR3420 I do all the bridge links on the tplink but I can't get the Internet #CPE_Mar_2019
-
VMG8823-B50B - Open port (5000) for access by ftp from outside my house
Hi, from a LAN of my VMG8823-B50B (firmware V5.13(ABOV.0)b1_20180824) to my WAN of my netgear D6400 I connect my pc and an hard disk (using usb of my netgear) because I want to use my netgear for all services and my zyxel only for my fiber access. Now I opened too port 5000 on my netgear for access to hd by ftp and I…
-
Does Node of NKN have to be high productive
No, the NKN software will not require high processing power and can be run on personal computers, smartphones, routers and switches. That is one of the design goals of NKN, and the reason we are putting serious research hours into Cellular Automata. Naturally the more processing power and link capacity a node has, the more…
-
Zyxel VMG8823-B50B how to set WAN
Hello guys, I have a Zyxel VMG8823-B50B and a router Netgear d6400, can you tell me how I have to set "broadband" in zyxel to redirect traffic to Netgear by WAN? Regards #CPE_Mar_2019
-
I have purchased a router during set up i used default password message invalid
how do I resolve this #Others_Mar_2019
-
No-ip and access to hd by ftp
I set on my Zyxel VMG8823-B50B no-ip service and I want to access from outside my home to my hd. I registered to no-ip and I set parameter to router but I'm unable to access to hd by ftp. I have to open any port on my Zyxel? How? Regards #CPE_Mar_2019
-
PK5000Z DSL modem - port forwardig is not working.
I have a PK5000Z and I'm trying to set up Port Forwarding. (I'm a technical user, so I know all the basics) When I enter the info, and choose "apply" it says "please wait" for a few seconds, then it shows the same page, and the information is not saved. It still says "no rules defined". I tried it a few times in different…
-
EMG3425-Q10A latest firmware?
My current FW is V1.00(AAYJ.4)C0 Following the instructions in the manual, when I go to Expert Mode > Maintenance > Firmware Upgrade there is no button for Check for Latest Firmware Now. The only buttons I have are Choose File and Upload. Where can I get the bin for the latest FW? Thank you. #CPE_Dec_2018
