-
router zyxel VMG8823-50B
salve possiedo questo router come da titolo zyxel VMG8823-50B di proprietà di infostrada e da qualche mese che i dispositivi wifi non si connettono più al wifi 5ghz. provato a resettarlo, chiamato anche al gestore che me lo ha fornito e con i loro tecnici non siamo riusciti a far funzionare il 5ghz. hanno cambiato nome…
-
zyxel VMG3925-B10B router & samsung UE40ES7000 (TV) WI-FI ISSUE? ~ "SOLVED!"
zyxel VMG3925-B10B router & samsung UE40ES7000 (TV) WI-FI ISSUE? My samsung UE40ES7000 (TV) will NOT connect wirelessly to my new zyxel VMG3925-B10B router? TV is not faulty as it still connects wirelessly with my old Netgear router DGND3700v2. So, must be a configuration issue somewhere? Any ideas? Thanx! #CPE_June
-
Static routes are not saved
My router is Keenetic Start My firmware is NDMS v2.05(AAKV.0)C7 I create static routes and its work fine. But after a reboot its do not available in the web interface and don't work. Although they are stored in startup-config and running-config : ip route 10.0.0.0 255.0.0.0 192.168.9.1 ISP auto 1
ip route…
-
Password Not Working
Hi There, I have tried resetting my VMG3925-B10B amd tried to login with admin/1234, admin/admin, admin/password and none work. I have tried holding reset down repeatedly, but I seem to always get the same IP address. I tried also logging in as "user" who doesnt report as an invalid username, but user/user combintaion…
-
Telnet - CLI - Add web configurator password without GUI
I have a Zyxel Router (VMG3925-B10B) which I am trying to configure to replace my BT Home Hub 5 (which might I say, is awful, and horrible, in every possible way). The problem is, I cannot get logged in, none of the typical and previously working credentials are working - I just cant get logged in. I tried something…
-
need answers...... wlan/wps
my zyxel which i bought 2 months ago VMG1312-B10D router is up to mischif.when the WLan/wps GREEN LIGHT FLASHES then my router and internet connection works fine,but as soon as the WLAN/WPS LIGHT GOES SOILD GREEN the router seems to stop working and im not able to login to admin page.all pcs are hard wired to router.…
-
Upgrade to 5.13 from 5.11 VMG1312-B10D
Hi, I'm trying to upgrade from 5.11 to 5.13 and all that occurs is the router rebooting but no upgrade. When I try again, a message pops up saying illegal Image and then seems to disconnect the router from the internet, leaving only the Power LED green. I then have to force a reboot. Any help would be appreciated…
-
p-660hwp-d1 router not accepting firmware update
Having had this brand new router sat on my shelf for about 5 years thought it was time to use it, unfortunately the homeplug side won't connect to my existing hp-av network consisting of two TP-link hp-av units and one zyxel pla-4321. No problem i thought the tplink units did the same but were fine after a firmware update,…
-
IES-1248-51V support H248 (MEGACO)
Hi, i have 1248-51v while looking in to the config i am unable to locate H248 option, can any body tell this box supports or not? what i assume that i am running V 3.53 (ARY.7) 07/20/2014 which seems very old ,if possible kindly share me the latest version that supports h248 on my email: shaukat1011@gmail.com Thanks…
-
set IPSec tunnel on AMG1312-T10B
Hi everyoneI have two ADSL modem router AMG1312-T10B to use internet from two different ISP in two different location. I would like to connect these two network together.Is any one help me to configure my devices. Thanks. #CPE_May
-
Update Firmware by USB
Hi Folks, have a VMG3925-B10B router and I need to replace the firmware, but I cannot login to the webpage, I wanted to plug in a USB with the firmware loaded on it, and see if I cold upload the firmware bypassing the login page. Can anyone advise? #CPE_May
-
Cant see my 5G spot on NBG6604
Hello, I bought this router and did all the setup. I see my 2,4Ghz band on list, but my 5Ghz band wont show on list although i can configure it. I checked if my device supports it and it does, also I updated drivers. #Router_May
-
Wireless band 5GHZ disappeared (Zyxel VMG8823)
Hi all! I have got a Zyxel VMG8823. I tried to configurate the 5Ghz Band but i am UNABLE to do it. When i try to switch from 2.4Ghz band to 5Ghz band...I just cannot do it. I tried with another browser, even with mobile browser. I've already done Factory Reset, from Setting page and from the tiny button behind the modem,…
-
Nach Update kein Zugriff mehr auf Videos und Musik im Wlan
Hallo Liebes Forum Team, Ich habe seit meinem letzten update kein Zugriff mehr auf meine Videos und Musik Ordner jedoch der Ordner Bilder so wie Bilder in dem Ordner Videos werden mir angezeigt. Folgendes wenn ich mein Samsung TV anmachen erkennt er den Zyxel NAS 520. Wenn ich davon nun meine Videos (im video Ordner)…
-
PMG5317 T20B
Good afternoon. I have a question about the model PMG 5317 T20B. I need to know if lan ports can be configured in giga or any other speed.#CPE_May
-
what is the difference between TLS PVC and Normal PVC(vci/vpi) ?
what is the difference between TLS PVC and Normal PVC(vci/vpi) , How can we make use of this feature ? #Others_May
-
How to configure 2 PVC on same port with and without vlan , while having 1 ethernet port for egress
Hi All, I am using DSLAM IES-1000 and model: AAM1212-51/IES-612 DSLAM, where I m trying to do the following configuration: CPE -------0/33-- and 0/37 with vlan2-------------DSLAM --------SW -----PC1 and PC2 where I am configuring 0/33 and 0/37 with VLAN2 PVCs on my CPE and DSLAM i configured 0/33 pvc with PVID1 and 0/37 as…
-
Can't boot into new armor x1
I just bought a new armor x1. When I connect the power it flashes green for hours. I've tried a factory reset but the behaviour never changes. It broadcasts a ssid but won't give me an ip address I have tried to connect it to my computer both with wlan and lan but I won't get ip address. I've also tried to set the ip…
-
Opened Port but not seems to be opened
I open my 25565 port on my Access Point but i can't reach my port on another IP adress.
-
PLA4241 does not turn on home light nor in powerline not extender.
how can I reset fully the devices, does have power on and internet light on, but home light is not. I have tried different wasy of rested, but cannot get those working. note I have never ugrade firmware but does nto know how to update it. I get the file, but how to install? on the website does not recognize the Mac nor…
