-
GS1900-8HP how to set system time
Hi,every 6 months, I have to log onto my GS 1900-8HP and change the time settings manually. Is there a manual, describing in detail, how to configure the time settings, e.g. for Switzerland? ...[EDIT]I guess, I just got finally right: Enable SNTP: EnableTime Zone: UTC+01:00Daylight Saving Time: EnableDaylight Saving Time…
-
not so much a question, rather a web GUI suggestion
This (below) is part of the basic status screen. Hasn't this bothered you (all) before? The status of (eg) a port is "disable". Huh? "Disabed" maybe, but certainly not "disable", that's a command (a verb) not an adjective ("disabled"). So, it's very confusing when you're reading a status and it says "enable" and you think,…
-
XGS1930-28 vlan trunking support
Hello Folks My client has 2 professional routers connected to each other via fiber (SFP+). Each port is a vlan trunk port carrying multiple VLANs. I purchased a XGS1930-28 to connect it between the 2 routers and use its mirroring capabilities. Topology is quite simple: R1 (1 trunk port/multiple VLANs with 802.1q vlan…
-
XS1930 dropping ports
For a long time I've given up using the XS1930 because it would intermittently loose connectivity on a port. I could see in the log the port(s) going up and down regularly. Now I've got time to get back to it, I may have solved it (too soon to say for sure but it's looking better). The solution seems to be to hard-write…
-
Gs1900-24E and NetGate SG1100 - VLAN Configuration Issues
I cannot seem to properly get VLAN connectivity between new VLAN creation on Zyxel switch and pfsense VLAN. All is working properly when using default VLAN1. When I create new VLAN according to Zyxel documentation and videos and perform necessary VLAN creation of pfsense and all rules, I cannot seem to get desired VLAN ID…
-
Cisco L3 with GS2210 Zyxel VLAN configuration
Hello! I have the following configuration: VLAN 30 and VLAN 20 are configured in L3 (cisco) and PC's in this VLAN receive IP by DHCP (from L3)What I want to achieve is create another VLAN on L3, let's say VLAN 10 which would be the L2 switches management VLAN.By using Cisco switches (in simulator) I managed to achieve this…
-
GS1200-8 and vLAN configuration
Hi all, I have a very classic home configuration but seems that there is something that I'm missing on the GS1200-8 vlan configuration. Here is the story... I would like the separate and segregate two set of devices in order to avoid that the first set is not able to see the other and vice versa but both of them shall be…
-
IP table collision
Hi supporters, I have two question: Firstly, I am facing this too much on coreswitch XGS4600 when checking log 7 2022-03-20T20:42:13+07:00 IN switch: IP table collision : 192.168.x.x Product Model: XGS4600-32F ZyNOS F/W Version: V4.70(ABBI.2) | 12/17/2021 Could you tell me what should I do to fix this matter. Secondly, I…
-
Assign an access port to a vlan known by gvrp
Hi everybody,I'm familiar with VTP but not GVRP.I've configured my switches so the static vlans from one switch are propagated to other switches, but how can I configure a port to be an access port using a dynamically learned VLAN ? Is it possible like with VTP, or the only way is to create static vlans on the other…
-
GS2220 Transceiver
Hi https://download.zyxel.com/GS2220-10HP/datasheet/GS2220-10HP_5.pdf Can I buy 2x SFP-LX-10-D and connect just a 50m Glasbiber Cable?Thanks
-
gs1910 how to configure stp?
Hello, Please, can you tell me how to set up rstp on the gs 1910 model I dont understand, what is cist and msti? cist mapping, properties? @Zyxel_Melen
-
Firmware update for GS1200-5HP
Hi, Does anyone know where i find the latest firmware for GS1200-5HP switch? My current Firmware is V1.00(ABFE.0)C0 Thanks,
-
Connect GS2220 with each other?
https://download.zyxel.com/GS2220-10HP/datasheet/GS2220-10HP_5.pdfHow to connect both Switch offline together to maintain the switch without the cloud together?Thanks j
-
NSW100 - SNMP support?
Does NSW100-28P support SNMP? If so, how do I add the feature? I've got a few of these in stock, but we were never able to figure out how to get SNMP running. It would be great if we could get these working with Domotz for monitoring and to get network maps. Failing that, does anyone want to buy them? I have two or three…
-
GS1900-48 vlan trunk pfsense
Hello friends. I have an issue. Hopefully it is just misunderstood vlans. So i ask you to help me understand everything about my case. SG1900-48 right after reset and new firmware V2.70(AAHN.1) | 01/11/2022 PfSense Interfaces: VLAN's All VLAN's on one NIC igb0 Firewall for every interface only one rule, allow all. DHCP…
-
voice vlan gs2200
Hello, Can you please tell me if this model supports Voice vlan? I did not find the option to configure in the web interface. It is necessary that the IP phone be in its vlan. Zyxel gs2200
-
Turn Old Zyxel USG20 To Manageable or not Network Switch ?
Dear all, I am searching for a good alternative, and then, How to turn Old Zyxel USG20 (for instance) into a manageable Switch ? Or non Manageable. The idea is to recycle and give another life to these old product. And then, yes of course, How to Use add Wan Port ? So many thanks for your help in advance.
-
How to configure Vlan Trunk - Gs1910
Good afternoon, could you tell me how to configure the trunk port for vlan on the zyxel gs1910 switch. I have 2 vlans 100 and 200. It is necessary to connect 2 switches so that vlan traffic passes between them. Also, these ports are aggregated via LACP. Actually, I need to make them a trunk port. On cisco, this is done…
-
Automatic Backup of Switch Configurations.
Hi there, Recently we are undergoing implementation of several ZyXEL switches in an enterprise customer. Switches include XGS4600, XS3800, MGS3750, XS1930, XGS2210, XGS2210, GS1920, GS1350 in good quantities. I know, there is an option to take backup individually, by going into each switch UI. But it takes only config log.…
-
GS1200-8: VLAN segregation not working?
I have three GS1200-8 switches: GS1200-8 #1 (management VID=1100; fixed IP 10.0.0.101/24): * port 3 (trunk to GS1200-8 #2); PVID=5; VLANs=5 (untagged) + 1100 (tagged)* port 6 (access port to internet, connects directly to cable-modem (ISP's DHCP server assigns public IP addresses); PVID=50; VLANs=50 (untagged) * port 7…
