-
GS1900-8HP PoE control via SNMP
I just received a new GS1900-8HP switch. While being able to turn PoE for individual ports on/off using the browser, setting this via SNMP does not work (using OID 1.3.6.1.2.1.105.1.1.1.3.1.1).Does anyone know if/how this works with a GS1900-8HP?Thanks! #Biz_Apr_2019
-
Connecting a GS1900-10HP to a GS1900-8HP
How do you connect a GS1900-8HP to GS1900-10HP? I now need to connect in-between the two another switch. #Biz_Switch_Mar_2019
-
Zyxel GS1900-8HP Crashes after i change the password.
Hi guys, I have a Zyxel Gs1900-8HP switch which refuses to save the recent created password. When I log into the switch using the UI I get notified that I am required to change the password, so I do that but when I want to save the PW it crashes and turnes of the UI. After this it is not possible to login to the UI and it…
-
How can PoE be activated on GS1900-24
Hi there, I have bought the GS1900-24 and i cant find the PoE Configuration Options in my menu like it is described in the manual (see screenshot below). How can i activate PoE? I have the latest firmware: V2.40(AAHL.1)_20180705
| 07/05/2018 thanks in advance #Biz_Switch_Feb_2019
-
XGS2210-28 V4.50(AAZJ.0): VLAN configuration via console broken?
Hello! We need assistance for configuring VLANs via console:Enabling VLAN TX tagging does not work for us when using the console, while it works well using the web interface. Example: Interfaces 21-24 shall be configured for VLAN tagging. They are already configured for frame-type tagged: ... interface port-channel 21 name…
-
ES-2024PWR not monitoring PoE usage
Hi all, I have acquired an ES-2024PWR. I'm just setting it up for use with IP cameras. I have connected 1 IP camera, using PoE. The camera is working & connecting OK, but when checking the switch status, it is indicating that no PoE power is being used, but the camera is connected & working OK, no other power supply. Do I…
-
ZyWALL 110, GS1900-24E and GS1200-8E vlan setup
I'm looking to create some vlans to separate all these Internet of Things from our home network. It's not clear to me where I should originate the vlans or do I set up the same vlans on all devices? In reading the switch manuals they are the specific to the switch but don't mention how the ZyWALL fits in and vice versa.…
-
GS1920-24HP new password not accepted
Hi have a GS1920-24HP on the latest fw 4.50 and factory reset takes the default password but if you change the password it accepts the change and does the usual of telling you to close browser window and login in again, however after this it never accepts the new password. have tried a number of the other config changes…
-
After installing 3 x GS1200-8 I can not access some devices. Is there a special setup necessary?
Last week I bought 3 x GS1200-8 to renew my network. The 3 GS1200-8 are installed at a FritzBox 7490 Lan Port 1 ... 3. I'm using mostly Mac devices. One of my NAS WD myCloud Mirror and the Mac Mini can not be accessed in the network properly. Both are not showing up in the MacOS finder. When I try to connect to the NAS via…
-
GS1900-24E
Hi,I have problem with login into this switch. SSH, telnet and FTP is disabled. And login through http is not possible, becouse we have in password sign +. When I try login, the logon dialog after sending login credentials grayed out and nothing happend. I considered reset to defaults. But before that I need save VLAN…
-
vlan between 2 gs1200
hi everyone. I bought 2 switches to divide my physical LAN into 2 logical lan. I linked all 1 port to my router (so to have internet service) then I linked 4 pc for part (modified VLAN 1 with port 1 "tag egress member" and port -orange - and port 2&3 untag - green- and vlan 2 with port 1 orange and 4&5 green. Pc inside…
-
Just bought 2 of these switches and tried to connect to the WEB Configuration address
How do you connect these things? Tried connecting to another switch. Tried connecting directly to the computer. Tried connecting through a Time Capsule. Tried connecting on both a Mac and a PC. Browser doesn't see anything at 192.168.1.1 What do I need to do?
-
XGS4600-32F 4.50(ABBI.1) - High CPU usage when querying SNMP zynos_zyxelTransceiverDdmiTable
Hi, I've developed an OS module for LibreNMS. Currently it is able to poll :- * Stack CPU load * Stack memory utilisation * Unit temps * Unit fan speeds * Unit voltages But as soon as we started polling the optic DDMI table, the CPU jumped to 100% every 5 minute (LibreNMS polls... every 5 minutes) My LibreNMS repo branch…
-
Zyxel gs1920-24 does not send messages to 1813
Hello. I configure port authorization, the switch does not send messages to port 1813. The computer attempts to perform authentication, then it goes to the guest vlan, traffic on port 1813 does not go to the NAP server. My
-
GS1200 switch between modem and router?
Can someone advise me or direct me to the proper setup for putting my GS1200 switch between my router and modem? I want to do it this way so I can port mirror all of my network traffic. When I set up my VLAN for the switch I can no longer access the switch. Not sure what I am doing wrong. thanks!!! #Home_Switch_Mar_2019
-
VLAN & DHCP Server
Hello, i have a GS-1920, Synology-NAS as DHCP-Server and some Acess-Points.Now i would like to seperate WLAN into 2 SSIDs with VLAN. The Accesspoints supports VLAN and i created 2 SSIDs with VLAN16 and VLAN 15. Now i would like to connect the VLAN16 to the DHCP-Server.Therefor i configured the switch like:Port 1: connected…
-
GS1900-8HP missing MIB OIDs
Hello, I have GS1900-8HP with firmware V2.40(AAHI.1)_20180705 I would like to be able to swith PoE from port on and off. In GS1910-24HP it is possible using OID-.1.3.6.1.2.1.105.1.1.1.3, but is it in this? This OID can be found from MIB, but no data is found, and it is not listed in snmpwalk. Is is possible to control…
-
current firmware read-only / locked: mode 222
I just bought a GS3700-48 Switch with firmware ver. 4.1 will upgrade to 4.2> 4.3, I have discovered that the current firmware is locked: mode 222 how to change mode to 666
-
GS1900 series: some improvements of Web interface
Hello, I started to configure my 2 GS1900-8/-24E. Below I summarize a list of all things which could from my perspective be improved:* Could you add the port name right of the port ID in following screens? I cannot remember each name behind all of my ports and this would really help. a. When I click "Status", I see a…
-
VLans on Zyxel GS3700-24 (Firmware V4.30(AAFY.1))
Hello everybody. I am trying to configure some ports on the above switch with vlans. I successfully configured 2 ports has vlan trunks. On the ports i want to configure the vlans, i have computers connected. So, they aren't tagging vlans, the switch need to tag them. Regards