-
LAN ARP leak to bridge
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 WAN1 Ge1 Unassigned IP DMZ Ge7 Unassigned IP Br0 Unassigned IP I'm seeing ARP on the br0 WAN1 and DMZ that should not be there
-
Flex200 H over bridge was allowing ICMP when blocked
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 WAN1 Ge1 Unassigned IP DMZ Ge7 Unassigned IP Br0 Unassigned IP There is no rule that allows from WAN1 to DMZ for ping when I make a rule at the top of the list from WAN1 to DMZ ping block it did not block it and as for from DMZ to WAN1 it blocks fine I then checked session monitor which…
-
VPN for macos
Hi, Could you please confirm if the IPSEC VPN CLIENT WIN/MACOS license is necessary for the USG Flex100H? In case of a negative response is there a free-of-charge way to connect to the firewall by VPN? Also, from which macOS version does the Zyxel VPN client start to be supported? Thank you.
-
How to override-direct-route
Not listed in UI but by SSH edit running vrf main routing policy-route override-direct-route true commit copy running startup to disable vrf main routing policy-route override-direct-route false This option is helpful for some setups if you don't want to use Allow Asymmetrical Route
-
uOS 1.20
Hi team. When is the uOS 1.20 update going to be released? Was it scheduled for April 15? Thanks
-
HA PRO on FLEX H SERIES ?
I don't see the availability of HA PRO in FLEX H SERIES specs. It is supported or it will be supported in next future? Today i saw that my 2 VPN100 are End-of-Life…
-
Modifying BWM rule lockup
USG FLEX 200H V1.20(ABWV.0) Testing by www.youtube.com on UDP port 443 for the of a 4K video I make one rule with the following Incoming Interface ge4 LAN Outgoing Interface ge2 WAN2 Service Object UDP443 Download Limit 20Mb (yes not enough but part of the test) Upload Limit 4Mb Priority 7 You then watch a 4K video like…
-
DHCP Table - edit host names
When will the host names in the DHCP table be editable ? Having a huge DHCP Table with dozen of reservations it is a real pain without being able to enter a meaningfull host name. I know firmware is planned for april 2024 but let's be honest here H series (uOS) was just not ready to be sold and i feel trapped now even more…
-
Been seeing this error
most on routing and NAT rules moving them about
-
Error when changing VPN to "Nailed Up"
When the VPN is added to Zone LAN (or any other zone with a physical interface), I cannot change Phase 2 Initiation from Auto to Nailed Up. The VPN is deactivated and not connected. When it's added to IPSec_VPN I can change any time. Also please tell your web designer to not make the error dialogs a fixed height. Set CSS…
-
Web Filtering and APP Patrol Problem in USG FLEX700H
In my USG FLEX700H the Web Filtering and App Patrol i snot working, this problem startes on Saturday 20
-
Up time UI not loading in V1.20
USG FLEX 200H V1.20(ABWV.0) Everything now has spinning circles in UI then I see this: After 10mins the UI loads fine my site to site on USG60W show its not connected then if I go to IPSec VPN on FLEX200H the UI goes back spinning circles would you like to remote check it?
-
HTTPS Domain Filter enabled cause web pages to delay loading
USG FLEX 200H V1.20(ABWV.0) bypassing DNS lookups to not go by FLEX due to problems now even when not in use by Policy rule if HTTPS Domain Filter is enabled web pages get a delay when loading which V1.10 was faster. Cleared browser cache With HTTPS Domain Filter is enabled Cleared browser cache With HTTPS Domain Filter is…
-
Small cosmetic / annoying GUI things
Not sure how many of those you are already aware of. 1 - Odd default description value "user add" in Object > Zone > Add. 2 - Changing parameters and the trying to edit the same item again often gives a warning. The system should just check that by itself and reload in the background, shouldn't it? 3 - Most text inputs…
-
My DNS setup BROKEN by V1.20(ABWV.0)
USG FLEX 200H V1.20(ABWV.0) Just upgraded and already problems that are not in V1.10 which I did found and report when I was testing 110ABWV1ITS-M3715 and 110ABWV1ITS-24WK05-M3737.bin which now need to be fixed in order for my to test more. I will post a setup of the problem in a bit...I did notch the enable toggle for…
-
POE problem Flex 500h
I really do want to like the h series. IThere are so many flaws…hopefuly the next firmware brings something more to this at this stage unfinished product. I watd to try the much advertized POE feature. NO GO. from Poe to POE+ devices tried and plugged into P3 oror P4 + Switched POE to enable in the port menu … NOTHING. Do…
-
Multiple client-to-site Remote Access VPNs
Dear zyxel support, we previously had an ATP500 firewall, now we switched to USG FLEX 500H. in the ATP500 we was able to create multiple VPN connections of type "Remote Access (Server Role)", this way we could isolate different customers with different VPN Settings. I can't find a way to achieve the same goal on the new…
-
How to prevent multiple disconnection notifications of Zyxel ZyWALL SecuExtender VPN client?
I have Zyxel ZyWALL SecuExtender VPN client. After disconnecting SecuExtender is notifying three times about disconnection in right bottom notification area of Windows. How to prevent multiple notifications but leave only one notification?
-
Re-enable the web-GUI of a FLEX 500H with ssh terminal
Hi, I should reactivate the web-GUI interface of a Flex 500H if I try to check the status from ssh terminal with commands show state vrf main http-server server show state vrf main http-server secure-server both result disabled..... I tried to re-enable them from ssh with commands edit running vrf main http-server server /…
-
Change logging intervals w/o rebooting?
Settings I want to change: / logging send device-information "interval" "3600" / logging send system-status "interval" "60" / logging send interface-statistics "interval" "60" Is this possible without uploading a .conf and rebooting? @Zyxel: this should REALLY be in the web options! Also for older models! You have a…