-
NWA90AX - Firmware 7.00(1) change of logformat AGAIN
How many times do I have to CLEARLY state NOT to change the logformat, or AT LEAST include it in the flippin' changelog? You changed your logformat AGAIN!!!! You removed the year from the date: before: Jul 18 22:00:02 2024 NWA90AX after: Jul 18 22:00:02 NWA90AX and you added an unintentional space between source ip and…
-
WBE530 vs NWA130BE
What is the difference between the WBE530 and the NWA130BE AP's? Thanks, George
-
No WiFi
Hello, I'm in a rental apartment with a zyxel router, everything was fine, I went on a week long trip and came back yesterday noticing that there was a red light on the router and I couldn't find the WiFi network on my phone or computer. There is internet connection through the Lan cable. I already tried to switch on and…
-
Wifi visible but no internet
Hello, I have ZyXEL LTE7480 modem connected to ZyXEL NWA90AX Wifi switch. Modem’s configuration page and Nebula dashboard for wifi seem to show that all is working properly, incl. Connection test seems to work. However, mobile (iphone) nor laptop (Mac) are able to connect to wifi, or connect, but internet is not working.…
-
No Access from one WLAN-Client to another WLAN-Client, but from LAN
Hi, I have two Zyxel APs (NWA50AX PRO and NWA50AX) in Nebula mode. There are several WLAN-Clients that provide a webinterface. I can access those webinterfaces when I connect from a wired network-client, but I can't when I try to connect from another WLAN-Client. Layer-2-isolation and Intra-BSS-Blocking are not activated.…
-
AP "Update Available" USG-Flex 700 WAX630S
I tried the: click "Monitor/AP Info/upgrade icon"; I tried the: Config/Wireless/AP Management, upgrade every way that popped up a upgrade. My others 4, WAX630s AP's have updated; This AP 'TRAIN' was added recently. What is the trick to getting this AP to update??
-
Zyxel Nebula Access points connection issues
We have a customer with some issues with wifi. we have installed 4 Access points. the issue is very low throughput. speedtest gives us 0.4Mbit/s And to be honest i have limited understanding at the moment about wifi, so i want to start with some basic questions. When i look in nebula, to the clients, i see the TX rate and…
-
Slow throughput after vlan assignment by NPS
hello, I have a GS1920 switch and a NW220AX wifi terminal. Without dynamic VLAN assignment. the flow is ok. As soon as we attribute a vlan dynamically we find ourselves with a flow rate of 100 mbps. Impossible to know if it's the hardware or the configuration. Can you help me?
-
NWA 50 Pro: firmware is actually available?
I'm managing a NWA 50 PRO ap currently with firmware 6.65(1) installed. According to this site firmware 7.00(ACGE.1)C0 has been published for this product Checking on the device web management, no firmware is available for update. Trying to upload 700ACGE1C0.bin to the device (compressed into .zip file, 4 files available)…
-
NWA 1123-AC-Pro: Wrong/ No WLAN-Access
Dear Zyxel Team, I use an NWA 1123-AC-Pro with firmware version V6.28(0)/V2.4. The AP is configured as standalone: Fixed IP address, subnet… I'm trying to establish a wireless connection via this AP. I use an iPhone for testing purposes. I select the SSID of the AP on the iPhone and the iPhone asks for the network key. I…
-
T56 and nwa50AX pro
Goodafternoon. From Odido I got the zyxel T56 with a 1gb fiber connection. I had a mesh situation from google pods, but i was not satisfied. So I want to have a mesh with 1 pod and there was recommended the nwa50ax pro, also because i wanted to own the pod. But, it is not easy to install,… yes, as a router, that is no…
-
NWA1123ACv3 not allowing connections
Hi all, I have a NWA1123ACv3 that I want to use to extend my WiFi network. I plugged in to the main router via cable, hold the reset for 15 sec until the only light has a fixed green color, and let it be. After a bit, the light flashes slowly between green and yellow, non-stop and does not accept connections. Any idea if I…
-
Does NWA50AX support the Load Balancing?
Hi, I also have NWA50AX, you've mentioned "Utilize Load Balancing function to control the number of devices connected", I'm not using Nebula, quickly checked and I don't think I have this option in the stand-alone admin view or did I miss it somehow? Thank you! UPDATE: is there some issue with the UI? I can see it in the…
-
Reset NWA55AXE
How can i do a factory hardware reset on NAA55AXE? I recently bought an ‘open box’ and now regretting it since the device was registered in the store where it was ex-display from. When I add this to Nebula it just states it as offline all the time even though the green LED is on and seems to be receiving data. When on I…
-
Firmware 5.1 für einen NWA 3560-N
Hallo, hat jemand einen Link für mich für die Firmware 5.1 für einen NWA 3560-N?
-
NXC2500 with NWA3160-n and NWA3560-n mixed
Good morning everbody, I got a network with an nxc2500 and 8 NWA3160-n running 2 different SSID for internal and guest wifi. Everything is running perfectly. Now I wanted to add one NWA3560-n and that AP is always shown as MGMT in the AP management overview of the NXC's webinterface and it seems that it is not connecting…
-
WIFI?
I need help with my WiFi
-
nebula-fwa510 4 TS9 external cellular antenna ports
Which are TX which are RX or what are each of the 4 TS9 ports connected to internally.
-
AP WAC6103D-I
Hello, What could be the problem? In Nebula, it shows the device in a switched off state, but the Wi-Fi is working on it
-
WAC6103D LAN1 port VLAN passthrough
Dear all, I have a network with several VLAN's each connected to a different SSID. I would like to know if it is possible to connect an additional Access Point to an existing and working WAC6103D LAN1 port. Currently the second AP (connected to this LAN1 port) is seen and managed by the NXS2500 and the SSID corresponding…