Why the outside port don't work
Options
USG40W
Add of the internal ip adress 192.168.1.171 in the range of lan1
After
Add of a service on a tcp port 8790
Add of a group and in these grp add the service.
All was saved all seems like an other objet. No error encounters.
Add of a nat rules :
Apply button was pressed.
Add of two policy rules :
Port closed. could you help me ?
Add of the internal ip adress 192.168.1.171 in the range of lan1
After
Add of a service on a tcp port 8790
Add of a group and in these grp add the service.
All was saved all seems like an other objet. No error encounters.
Add of a nat rules :
Apply button was pressed.
Add of two policy rules :
Port closed. could you help me ?
0
All Replies
-
Is your WAN port set with the WAN IP or behind NAT?
Set rule 1 with source IPv4 to any
0 -
-
After the change nothing change the port is always closed
0 -
Hello @itdsc,For your NAT rule, please set Source IP to "any", and your security policy rule 2 is not needed.Moreover, once the NAT rule is created, the external port should be open, we're not sure the online port scan works correctly on our device.If it still no work, please capture the packets on both WAN and LAN interface, provide to me through PM for further checking, thank you.James0
Categories
- All Categories
- 395 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 83 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 914 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 417 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight