USG FLEX 50 D DHCP Table error without Host Names for static IP.
We have installed and used the USG FLEX 50 for testing and it has worked very well. After the software was upgraded to V3.32(ABAQ.0), it was no longer possible to see the network servers (ASUSTOR NAT) connected to the local network with fixed IP addresses and names. Neither Windows 7 nor Windows 10 computers showed any servers listed with "Network". USG FLEX 50 had "IP/MAC Binding" with correct settings" and thus had contact with the network servers but "DHCP Table" only "Host Name" = "none" which was expected to be "SERV1", "SERV2", or "SERV3". When I search for "ZYXEL" it says that the software has been changed in this regard and I don't know what to do.Is there anyone I can contact?
Comments
-
Inringade med röd markering ses felen:
SERV1 statisk IP: 192.168.0.102 => fel 192.168.0.155 => namn "AS-606T-EF78" (korrekt SERV1)
SERV2 statisk IP: 192.168.0.103 => fel 192.168.0.156 => namn "AS-606T-F556"(korrekt SERV2)
SERV3 statisk IP: 192.168.0.104 => korrekt 192.168.0.104 med IP/MAC bindning => namn "none"
0 -
USG FLEX 50 D DHCP-tabellfel utan värdnamn för statisk IP. Finns det någon jag kan kontakta (Telefon eller E-post)?
0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 86 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 916 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 419 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight