how to configure ports if access points connected to switch and switch has different VLANS

maheshreddy
Posts: 3

in Switch
switch has different vlans and need to tag vlans to different SSID
0
All Replies
-
i have found solution as per the below
Ex : Uplink port : 24
Access point Ports : 1 to 4
VLANs : 200,300 ,400and MGMT VLAN 100
Access points IP VLAN : 400
we need to tag all VLANs into 24 and select PVID is 100
we need to tage all VLANs into 1 to 4 ports and select PVID is 400
and we need to mention VLAN ID in aceess point conifguration
0 -
Hi @maheshreddy,
Which model are you asking for?
The uplink port should be VLAN 100 untagged member and VLAN 200, 300, 400 tagged member.
Port 1-4 should be VLAN 400 untagged members if the SSID's VLAN is the same as the access points' management VLAN.
Melen0 -
in access point configuration , we are mentioning VLAN ID
0
Categories
- 8.1K All Categories
- 1.6K Nebula
- 59 Nebula Ideas
- 54 Nebula Status and Incidents
- 4.3K Security
- 222 Security Ideas
- 934 Switch
- 41 Switch Ideas
- 818 WirelessLAN
- 19 WLAN Ideas
- 5K Consumer Product
- 136 Service & License
- 266 News and Release
- 52 Security Advisories
- 13 Education Center
- 536 FAQ
- 252 Nebula FAQ
- 132 Security FAQ
- 73 Switch FAQ
- 72 WirelessLAN FAQ
- 7 Consumer Product FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 66 About Community
- 44 Security Highlight