how to configure ports if access points connected to switch and switch has different VLANS

Options
maheshreddy
maheshreddy Posts: 3
First Comment
in Switch

switch has different vlans and need to tag vlans to different SSID

All Replies

  • maheshreddy
    maheshreddy Posts: 3
    First Comment
    edited March 2023
    Options

    i have found solution as per the below

    Ex : Uplink port : 24

    Access point Ports : 1 to 4

    VLANs : 200,300 ,400and MGMT VLAN 100

    Access points IP VLAN : 400

    we need to tag all VLANs into 24 and select PVID is 100

    we need to tage all VLANs into 1 to 4 ports and select PVID is 400

    and we need to mention VLAN ID in aceess point conifguration

  • Zyxel_Melen
    Zyxel_Melen Posts: 1,636  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options

    Hi @maheshreddy,

    Which model are you asking for?

    The uplink port should be VLAN 100 untagged member and VLAN 200, 300, 400 tagged member.

    Port 1-4 should be VLAN 400 untagged members if the SSID's VLAN is the same as the access points' management VLAN.

    Zyxel Melen

  • maheshreddy
    maheshreddy Posts: 3
    First Comment
    Options

    in access point configuration , we are mentioning VLAN ID

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）