Assigning private Vlans to zyxel AP SSID

Options
Tazman
Tazman Posts: 4
First Comment
edited November 2023 in Nebula

Is it possible use a zyxel AP to tag an SSID so the SSID connects to a private vlan?


I have not purchased any zyxel APs yet I’m just trying to familiarize myself with all the options.

Thank you


All Replies

  • Zyxel_Judy
    Zyxel_Judy Posts: 922  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options

    Hi @Tazman ,

    You can refer to this FAQ to configure to separate SSIDs between Zyxel APs.

    And then, go to Configure > Access point > SSID advanced setting to assign the VLAN ID for each SSID:

    Please make sure that the gateway and switch(es) have configured the corresponding VLAN interface.

    Be a Community MVP: Win a VIP Deal Dash on Your Next Zyxel Purchase!

  • Tazman
    Tazman Posts: 4
    First Comment
    edited June 2023
    Options

  • Tazman
    Tazman Posts: 4
    First Comment
    Options

    This answer makes it seem like it’s not possible. A private vlan is a vlan within a vlan, so I’d be real surprised if just tagging a vlan is enough.

  • Zyxel_Judy
    Zyxel_Judy Posts: 922  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options

    Hi @Tazman ,

    From you description, we assume that your goal is to avoid AP_1 and the wireless clients connect to AP_1 (connect to port 7) to communicate to AP_2 and the wireless clients connect to AP_2 (connect to port 8) although all of them are belong to VLAN10.

    If this is the case, after doing the configuration on the previous post, you may configure port isolation on Switch to achieve the goal.

    Steps:
    1. Advance application > VLAN > VLAN configuration > VLAN port setup
    2. Check the "Isolation" box where the APs are connected, and click "Apply" button.

    Be a Community MVP: Win a VIP Deal Dash on Your Next Zyxel Purchase!

Nebula Tips & Tricks