[NEBULA] Connection VPN L2TP Over Ipsec from windows

dbarchitectes
dbarchitectes Posts: 2
edited April 14 in Nebula
Hello,
I have a NSG50 and a DMZ configured on my router.
I configured VPN L2TP Over Ipsec with a shared key and a vpn user authentification.
All it's ok since my smartphone but not from a windows 7 or 10
On my different windows 7 or 10, i configured the register key "AssumeUDPEncapsulationContextOnSendRule"
 I configured VPN connection Properties as seen on the forum, for protocols (chap etc...) 
Nothing. 
Could you tell me if I missed out on a configuration for windows 10 computers ?

Mickaël

Accepted Solution

All Replies

  • ivers
    ivers Posts: 36  Freshman Member
    @dbarchitectes
    Have you try to reboot?
    I got experienced last time, reboot the PC to apply the change.
  • Zyxel_Chris
    Zyxel_Chris Posts: 409  Zyxel Employee
    Hello @dbarchitectes
    Welcome to the community!!!
    And thanks for @Alfonso sharing the command.
    @Mickaël Is your setting is same as the following screenshot? Please don't hesitate to let me know if the issue still persist, I can help to cross check.

    Cheers.

    Chris
  • Hello,

    Thank you @Alfonso . It's ok.
    When I did it in manual, it did not work but it is ok with the command line, in short, it works and it is the main one.
    Do not forget also advanced properties also as explained in the link, but for me it was already done.

  • jml
    jml Posts: 1

    It works for me too !

    Thanks

Sign In to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click on this button!