[NEBULA] Guest network question
Accepted Solution
-
Hello @JKoppen
The easiest way is to create another site and add one AP there with guest network enabled.
But if both APs have to be on the same site, then you'll need to use "tagging" (not to be confused with VLAN tagging).
You can find more about that here:
https://businessforum.zyxel.com/discussion/756/how-can-i-configure-to-separate-ssids-between-naps#latest
What you'll need to do is tag one AP with something like "With_Guest", then add this tag on the SSID with Guest Network enabled.
This will enable both Private and Guest SSID on my NAP303.
While enabling only Private SSID on my NAP203.
Cheers,
Barney6
All Replies
-
Hello @JKoppen
The easiest way is to create another site and add one AP there with guest network enabled.
But if both APs have to be on the same site, then you'll need to use "tagging" (not to be confused with VLAN tagging).
You can find more about that here:
https://businessforum.zyxel.com/discussion/756/how-can-i-configure-to-separate-ssids-between-naps#latest
What you'll need to do is tag one AP with something like "With_Guest", then add this tag on the SSID with Guest Network enabled.
This will enable both Private and Guest SSID on my NAP303.
While enabling only Private SSID on my NAP203.
Cheers,
Barney6 -
Great!
This was indeed what I was looking for.
Thank you for your reply0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight