How to connect 4G antenna ports in Zyxel FWA510?

Fadhil

Hello everyone

I am using zyxel fwa510 and living in an area with 4G only ...and the 4G signal is poor.

The router has 4 ts9 external antenna ports and I need your help to choose which pair of ports is for 4G (band 1 2100 mhz and band 3 1800 mhz only are available here).

I am using Kaser V3 antenna with two ts9 ends.

Thank you

themaxlm

les différentes prises
les sélectionner en conséquence :

Port

ANTO(principal)

Fréquence

703 MHz-4200 MHz

Q⑦

Port

DRX

Fréquence

703 MHz-4200 MHz

Port

MIMO3

Fréquence

1710MHZ-4200MHz

Port

MIMO4

Fréquence

1805MHZ-4200MHz

jeffreychan

Typically, the ports are labeled with LTE band numbers, and you should choose the ones corresponding to the bands you want to boost. In your case, for 4G with Band 1 (2100 MHz) and Band 3 (1800 MHz), you'll need to connect your Kaser V3 antenna to the ports that support these bands like poly track

tonygibbs16

Hello @Fadhil and everyone.

Zyxel say in the following linked post to connect to all 4 but provide more details also:

https://community.zyxel.com/en/discussion/20478/fwa510-external-antenna-conection-do-i-need-to-connect-all-four

If you cannot do all 4, e.g. because the Kaiser v3 has only two connections according to https://www.amazon.co.uk/Omnidirectional-698-2700MHz-Connector-Compatible-Receiving/dp/B08T5YBLZM then might I suggest connecting the top 1 definitely (called Ant0(main) ) and then try the other 3 in turn to see which works the best…

Kind regards,

Tony