NXC2500 with NWA3160-n and NWA3560-n mixed

Юрий

Good morning everbody.

I have a similar problem.

The firmware of the NWA3560-n is 2.23, the NXC's firmware is V5.40(AAIG.0).

 I need NWA3560-N to version 5.10.

Help me please.

Best regards.

Yurij.

Mirko

Hi Yuri. Well please check the post above. There you find a link to download and update the firmware via ssh.

Works perfectly.

Best regards...

Mirko

Юрий

Link no work.

Best regards.

Yurij.

Юрий

Hi, ALL.

Can someone download again firmware 5.10 for NWA3560-N?

Best regards.

Yurij.

Zyxel_KathyLin

https://businessforum.zyxel.com/discussion/comment/8837#Comment_8837

Hi,

Welcome to Zyxel forum!

Here is a link for NWA3560-N become version 5.10.

https://www.dropbox.com/s/uuafltj2oortzlg/nwa5kcn50?dl=0

Following the steps let AP firmware updating.

Upgrade firmware by FTP.

How to upgrade firmware to controller/Access Point by FTP?

https://businessforum.zyxel.com/discussion/649/how-to-upgrade-firmware-to-controller-access-point-by-ftp#latest

Hope above ways can help you.

Kathy

Юрий

Юрий

Hi Kathy.

I downloaded the file and installed it in 3560-N. the Controller saw the device. Thanks. One question. This firmware only works with the controller?

If I want to return to the mode STANDALONE I will have to install the firmware that was standing?

Best regards

Yurij.

Zyxel_KathyLin

Hi Yurij,

The NWA3560-N had three mode, which can be a controller mode, managed mode and standalone mode.

Currently, if you want to change AP from managed mode to standalone mode, you have to change AP FW version back to 2.23(UJC.8)C0.

The AP firmware download link as below:

https://www.zyxel.com/support/DownloadLandingSR.shtml?c=gb&l=en&kbid=M-00023&md=NWA3560-N#searchZyxelTab4

Let me know if you have any concern.

Kathy

WolfgangSt

Hi,

i must connect a NWA3560-N to my USG-3010 as a managed AP.

Can someone give me a link to download firmware 5.10?

Best regards

Wolfgang

Zyxel_Joslyn

Hi @WolfgangSt

Here is the link to download the firmware for NWA3560-N.

https://www.dropbox.com/s/uuafltj2oortzlg/nwa5kcn50?dl=0

And here is SOP to upgrade the firmware.

https://businessforum.zyxel.com/discussion/649/how-to-upgrade-firmware-to-controller-access-point-by-ftp

Please let me know if it helps.

Thanks.

Joslyn