NXC2500 with NWA3160-n and NWA3560-n mixed
Good morning everbody.
I have a similar problem.
The firmware of the NWA3560-n is 2.23, the NXC's firmware is V5.40(AAIG.0).
I need NWA3560-N to version 5.10.
Help me please.
Hi Yuri. Well please check the post above. There you find a link to download and update the firmware via ssh.
Link no work.
Can someone download again firmware 5.10 for NWA3560-N?
Welcome to Zyxel forum!
Here is a link for NWA3560-N become version 5.10.
Following the steps let AP firmware updating.
Upgrade firmware by FTP.
How to upgrade firmware to controller/Access Point by FTP?
Hope above ways can help you.
I downloaded the file and installed it in 3560-N. the Controller saw the device. Thanks. One question. This firmware only works with the controller?
If I want to return to the mode STANDALONE I will have to install the firmware that was standing?
The NWA3560-N had three mode, which can be a controller mode, managed mode and standalone mode.
Currently, if you want to change AP from managed mode to standalone mode, you have to change AP FW version back to 2.23(UJC.8)C0.
The AP firmware download link as below:
Let me know if you have any concern.
i must connect a NWA3560-N to my USG-3010 as a managed AP.
Can someone give me a link to download firmware 5.10?
Here is the link to download the firmware for NWA3560-N.
And here is SOP to upgrade the firmware.
Please let me know if it helps.
- 8.4K All Categories
- 1.6K Nebula
- 70 Nebula Ideas
- 57 Nebula Status and Incidents
- 4.5K Security
- 226 Security Ideas
- 980 Switch
- 46 Switch Ideas
- 871 WirelessLAN
- 22 WLAN Ideas
- 5.1K Consumer Product
- 156 Service & License
- 280 News and Release
- 97 Success Stories
- 58 Security Advisories
- 13 Education Center
- 579 FAQ
- 262 Nebula FAQ
- 160 Security FAQ
- 76 Switch FAQ
- 74 WirelessLAN FAQ
- 7 Consumer Product FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 69 About Community
- 46 Security Highlight