How to choose boot partiation by CLI

Options
Zyxel_Kevin
Zyxel_Kevin Posts: 795  Zyxel Employee
First Anniversary 10 Comments Friend Collector First Answer

Scenario:

You have trouble on running firmware but can't access WebGUI. Please use CLI to boot another firmware by console or SSH (if it's available)

Solution:

Router(config)# set firmware boot number

<1..2>

Reboots the Zyxel Device immediately with firmware in partition 1 or 2. If 2 is the Standby partition, then it becomes the Running partition after reboot. Use show version to see which partition is Standby and which is Running.

Tagged: