NAS542 Drives cannot be find

Options
aattila65
aattila65 Posts: 2
First Comment
in Personal Cloud Storage

After a firmware update the NAS542 device wont show its hdds on the network. Read a few similiar articles but didn't manage to find a sollution.

So here is what i know: If I start up the NAS542 with the hdds in it then I can't see it on the network. If I start it up without the hdds then I can see the device on the network and I can access the web ui. Now managed to realize that afther the second method of startup I put the hdds in and the web ui recognizes them but theres no raid or anything.

There are important data on the storages that I want to keep/save.

Please if you need further details ask it and i will try to answer.

naspic1.png naspic2.png naspic3.png naspic4.png

Accepted Solution

  • aattila65
    aattila65 Posts: 2
    First Comment
    Answer ✓

    Update: installing an older firmware the problem solved.

All Replies

  • aattila65
    aattila65 Posts: 2
    First Comment
    Answer ✓

    Update: installing an older firmware the problem solved.

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）