XGS1930 2.5 Gbit/s with SFP+ RJ45 Modul possible?

Options
Tzunami
Tzunami Posts: 14  Freshman Member
First Anniversary 10 Comments Friend Collector

XGS1930

Is it possible to connect a 2.5 Gbit/s client to one of the SFP+ ports (with a RJ45 10 Gbit/s Modul) and get the full 2.5 Gbit/s, or are only 1 Gbit/s and 10 Gbit/s possible?

Best Answers

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,202  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    edited July 4 Answer ✓
    Options

    Hi @Tzunami ,

    We have tested your case on our site, and the results confirm that it is possible to connect a 2.5 Gbit/s client to one of the SFP+ ports using an RJ45 10 Gbit/s module, our SFP10G-T, and achieve the full 2.5 Gbit/s speed.

    However, based on typical usage scenarios and specifications, we recommend using the SFP+ module for uplink to use its 10G capability.

    FYI: Please note that the XGS1930 web GUI will display 10Gbps - the data link speed between XGS1930 and SFP10G-T.

    Share yours now! https://bit.ly/4aO0BMF

    Judy

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,202  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options

    Hi @Tzunami ,

    You can find the minimum power consumption for the XGS1930 series in the datasheet. For instance, the minimum power consumption for the XGS1930-28 is 12.4 watts. You can refer to the datasheet here:

    https://download.zyxel.com/XGS1930-28HP/datasheet/XGS1930-28HP_6.pdf

    Share yours now! https://bit.ly/4aO0BMF

    Judy

All Replies

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,202  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    edited July 4 Answer ✓
    Options

    Hi @Tzunami ,

    We have tested your case on our site, and the results confirm that it is possible to connect a 2.5 Gbit/s client to one of the SFP+ ports using an RJ45 10 Gbit/s module, our SFP10G-T, and achieve the full 2.5 Gbit/s speed.

    However, based on typical usage scenarios and specifications, we recommend using the SFP+ module for uplink to use its 10G capability.

    FYI: Please note that the XGS1930 web GUI will display 10Gbps - the data link speed between XGS1930 and SFP10G-T.

    Share yours now! https://bit.ly/4aO0BMF

    Judy

  • Tzunami
    Tzunami Posts: 14  Freshman Member
    First Anniversary 10 Comments Friend Collector
    Options

    I have a second question.

    What is the min. power consumption when simply running the XGS1930 (no connections, no SFP+ Modules)? I only found the max. power consumption of 24.6 Watt.

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,202  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options

    Hi @Tzunami ,

    You can find the minimum power consumption for the XGS1930 series in the datasheet. For instance, the minimum power consumption for the XGS1930-28 is 12.4 watts. You can refer to the datasheet here:

    https://download.zyxel.com/XGS1930-28HP/datasheet/XGS1930-28HP_6.pdf

    Share yours now! https://bit.ly/4aO0BMF

    Judy

  • Tzunami
    Tzunami Posts: 14  Freshman Member
    First Anniversary 10 Comments Friend Collector
    Options

    Thx, I have read an older datasheet without this data ;)