FWA710 gets no working i-net connection
Options
Dear all,
here is my scenario:
- ZTE MC889, with "Deutsche Telekom" Sim, up and running, all in default
- Zyxel FWA710, with "Deutsche Telekom" Sim, up and running, all in default
- both are connected to a USG cloud gateway ultra
- ZTE to WAN 1 (configured to auto) gets a IPv4
- FWA710 to WAN 2 (configured to auto) gets no IPv4
- i-net traffic via the ZTE is possible, via the FWA710 is not possible.
If I switch from auto to manual on the USG WAN 2 and activate IPv6 I get an IP (v6) but I don't know the prefix
Any advice. I attach some screenshots.
Thanks a lot, Marcus
0
Accepted Solution
-
All, problem solved. By default the first APN setting is configured to IPv6 which doesn't work in Germany. I changed that accordingly to IPv4 with PAP authentication and now everything is fine!
0
All Replies
-
All, problem solved. By default the first APN setting is configured to IPv6 which doesn't work in Germany. I changed that accordingly to IPv4 with PAP authentication and now everything is fine!
0
Categories
- All Categories
- 438 Beta Program
- 2.7K Nebula
- 188 Nebula Ideas
- 121 Nebula Status and Incidents
- 6.2K Security
- 454 USG FLEX H Series
- 303 Security Ideas
- 1.6K Switch
- 81 Switch Ideas
- 1.3K Wireless
- 44 Wireless Ideas
- 6.8K Consumer Product
- 278 Service & License
- 435 News and Release
- 88 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.2K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 91 Security Highlight