How to Configure Port Forwarding for a Nebula Mobile Router?

Zyxel_Jami
Posts: 130
Zyxel Employee





Port Forwarding Steps for Nebula Mobile Router:
- Create a New Port Forwarding Rule:
- Service Name: Choose a name for the rule (e.g., "IP Camera").
- IP Address: Enter the internal IP address of the device you want to forward traffic to (e.g., the IP address of your camera).
- Start/End Port: Select an external port (e.g., 8080) for remote access. Avoid using reserved ports like 80 (HTTP) or 443 (HTTPS).
- Translation Start/End Port: Set the port number required by your device (e.g., port 80 for HTTP access).
- Protocol: Set to "ALL" (or TCP/UDP if needed).
- Save and Apply the Rule:
- Once the rule is saved, the device will be accessible externally using the public IP and external port (e.g.,
http://your-public-ip:8080
).
- Once the rule is saved, the device will be accessible externally using the public IP and external port (e.g.,
Make sure to test the configuration to ensure proper remote access to your device.
0
Categories
- All Categories
- 429 Beta Program
- 2.6K Nebula
- 163 Nebula Ideas
- 112 Nebula Status and Incidents
- 6K Security
- 350 USG FLEX H Series
- 291 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 42 Wireless Ideas
- 6.6K Consumer Product
- 261 Service & License
- 406 News and Release
- 87 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.8K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 82 Security Highlight