Rooting of USG60W

G_L

Guys trying to paste a rooting I had in one of my CISCO routers and i find it EXTREMELEY difficult to do this in Zyxel. I am not at all expert so your step-by-step help will greatly appreciated.

Please also note that the CISCO router was the router to the outside world(intenet -e.g external IP 164.212.25.225) and my internal network. Now I have put between CISCO (192.168.2.1) and my internal network the ZYXEL USG60W (192.168.1.1).

I have on purpose provided 3 IPS (public ip, router Ip and Zyxel ip) to be inlcluded in your step by step answer.

Appreciated very much

20181228_185535 (1).jpg

PeterUK

Put the USG60W in expert mode

Network > NAT

add

classification = virtual server

Incoming interface = wan1

Original IP = wan1

(create new object > address

Name =wan1

address type = INTERFACE IP

interface = wan1)

mapped IP = User Defined

User-Defined mapped IP = 192.168.2.200

port mapping type = ports

original start port =5390

original end port =5399

mapped start port =5390

mapped end port = 5399

do the same to the rest in your list

GLou

Thanks.

You havent define port type, tcp/udp most propably will be any but i am confused with port numbers.

I need to use the 50000 -50011 as these come from my Divar and also use the 443 porr external whichb is secure.

Why do you also use a range i.e 5390-5399

Do I also need to go to ,security, to setup something?

PeterUK

I'm not sure I get what you want? You want the setup on Cisco to be on USG60W from your screenshot?

CHS

Hi @G_L

I guess you are looking for setup port forwarding configuration on USG.

You can reference to FAQ first.

And of course policy control rule is required.

GLou

Have tried and is a bit not that straight fwd to me as was the CISCO setup