How to resolve the Zyxel FWA7100 IP from internal network

advapiIT

Hello,

I've a Zyxel FWA 710 that is configured in bridged mode, then a FritzBox 7590AX that's used to connect home devices, DECT and so on.

The issue I've is that every time I need to connect to the route I've to do something as

C:\Users\paolo>tracert www.google.com


Tracing route to www.google.com [216.58.204.228]

over a maximum of 30 hops:


  1    <1 ms    <1 ms    <1 ms  fritz.box [192.168.1.1]

  2     2 ms     1 ms    <1 ms  151.59.109.176

  3     *        *        *     Request timed out.

  4    22 ms    20 ms    23 ms  10.75.13.170

  5    61 ms    16 ms    19 ms  151.7.80.14

  6    52 ms    19 ms    19 ms  milo-b02-miot-t02-ge1-1.wind.it [151.6.7.42]

  7    34 ms    28 ms    18 ms  151.6.7.181

  8    28 ms    31 ms    28 ms  74.125.32.80

  9    57 ms    24 ms    30 ms  209.85.254.219

 10    23 ms    19 ms    20 ms  192.178.82.63

 11    48 ms    18 ms    19 ms  par21s06-in-f228.1e100.net [216.58.204.228]

Then in this case get the 151.59.109.176 and connect to it.

Can I add a DNS header as fritz.box so I can just connect to it?

Thanks

Paolo

Zyxel_Melen

Hi @advapiIT,

You can access FWA710 from internal when it is under bridge mode is normal behavior.

You can check the IP address of FWA710 on Nebula device detailed information page. If you want to set domain name for FWA710, you may use DDNS function for this requirement.

Additionally, to access the FWA710 in IP-passthrough mode, please reference this FAQ:

[Mobile router] How to access the local GUI in IP passthrough mode? — Zyxel Community

Hope it helps.