FWA710 port forwarding issues


Hi, I have bought a Zyxel FWA710 to replace my current 4G Mobile router Teltonika RUT240. Behind the router I have few camera and a NVR that I normally access from remote using a DDNS service from NOIP.
I am trying to replicate the same scenario with FWA710 but I, and the specialist of reseller I bough from, am finding issues in setting the port forwarding rules.
The FAW710 user manual is very poor in explain how to do; there are neither configuration example nor the syntax to access from remote.
For sure it is different from the way I have been doing on Teltonika RUT240 that is as follow:
Mobile Router IP Address: 192.168.1.1
Camera IP address: 192.168.1.115
DNS host address: fattoria.ddns.net
The port forwarding configuration on the RUT240 is the following:
IPv4 tcp, udp From any host in wanVia any router IP at port 18600 | IP 192.168.1.115,
port 443 in lan
From internet I digit: https://fattoria.ddns.net:18600 and I land on my camera
I saw few posts on Zyxel community where there are similar cases and it seems there are few sections filled.
Could you please advise how I can replicate the port forwarding as I descibed above?
Many thanks
Categories
- All Categories
- 435 Beta Program
- 2.7K Nebula
- 176 Nebula Ideas
- 118 Nebula Status and Incidents
- 6.1K Security
- 428 USG FLEX H Series
- 298 Security Ideas
- 1.6K Switch
- 79 Switch Ideas
- 1.2K Wireless
- 44 Wireless Ideas
- 6.7K Consumer Product
- 274 Service & License
- 422 News and Release
- 88 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.2K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 89 Security Highlight