Cannot change DHCP scope on an FWA510

scisuk

Validation seems to fail on anything we enter:

Zyxel_Tina

[Update]

The customer reported an issue when configuring the FWA510 LAN settings in Nebula, as the lease time setting kept failing regardless of the value entered. We confirmed the issue was identified and a fix was scheduled for release next Tuesday. As a workaround, for anyone encountering the same problem, please configure the settings via the local GUI. As long as no changes are made on NCC, it will not push settings down to overwrite the local configuration, and any IP settings on NCC will not be synced from the local side.

Zyxel_Tina

[Update]

The issue has been fixed and resolved.

Zyxel_Tina

Hi @scisuk,

Welcome to the Zyxel Community!

Regarding your question, we noticed that you have also opened a ticket, and we have identified the problem. A solution is currently being prepared. We'll mainly inform you of any updates or follow up with you through that ticket to assist you.

Thank you for your cooperation and understanding!

Zyxel_Tina

[Update]

The customer reported an issue when configuring the FWA510 LAN settings in Nebula, as the lease time setting kept failing regardless of the value entered. We confirmed the issue was identified and a fix was scheduled for release next Tuesday. As a workaround, for anyone encountering the same problem, please configure the settings via the local GUI. As long as no changes are made on NCC, it will not push settings down to overwrite the local configuration, and any IP settings on NCC will not be synced from the local side.

Zyxel_Tina

[Update]

The issue has been fixed and resolved.