[NEBULA] How to connect server to Zyxel XGS1930-28 SFP+ port

Snohetta

Hello, we have a server With 10GB nettwork card that i would like to Connect to the sfp+ 10GB port on a Zyxel XGS1930-28 if that is possible?

The nettwork card on the server is rj-45, and i cannot seem to find a sfp+ module for the xgs1930-28 that supports higher than 1GB. However i found a sfp+ from another wendor (Ubiquiti U Fiber UF-RJ45-10G) but im not sure if that would work.

Can anyone give me some tips here on how i can get my server Connected to the sfp+ ports on the switch?

Thanks

Zyxel_Chris

Hello @Snohetta

Sorry, we don't have SFP 10G (fiber to copper) in datasheet and neither guarantee third party transceiver, but if you got a Ubiquiti transceiver in hand, you may give it a try and share the result for us. ?

Marcolz

I tried this one, to connect a 10 GBe port RJ45 of a QNAP to SFP+ with no success:

H!Fiber.com 10G SFP+ Copper RJ45 Transceiver

Blue light on the SFP+ port of the Zyxel is on, but Nebula shows no connection.

Funny thing is that in the QNAP console the port appears to be connected.

Tomorrow I'm getting this one and I'll let you know: https://www.amazon.it/gp/product/B01M8O3MAL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Marcolz

Marcolz said:

I tried this one, to connect a 10 GBe port RJ45 of a QNAP to SFP+ with no success:

H!Fiber.com 10G SFP+ Copper RJ45 Transceiver

Blue light on the SFP+ port of the Zyxel is on, but Nebula shows no connection.

Funny thing is that in the QNAP console the port appears to be connected.

Tomorrow I'm getting this one and I'll let you know: https://www.amazon.it/gp/product/B01M8O3MAL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I need to correct my a.m. message....

After rebooting the switch, with the transceiver left inside, the 10 GB connection is working!!!