How I can do NAT to my security camera

YSI Posts: 1  Freshman Member
edited October 2017 in Smart Home Product
My router is  Zyxel VMG1312-B10D
Can You help me:
My camera is ok LAN but WAN works not.
1.  Active   X
2. Service name:  Camera
3. WAN interface:  ADSL
4. WAN ip:   
5. Start port:   2000
6. End port:    2000
7. Translation start port:   80
8. Translation end port:  80
9. Server ip address:      it works in LAN
10. Protocol:   TCP

My Camera answers by WWW browser in LAN  OK
I try by my phones www browser   "my router address"/2000    is it ok


All Replies

  • Zyxel_Sally
    Zyxel_Sally Posts: 32  Zyxel Employee
    Many thanks for you choosing Zyxel product. Since VMG1312-B10D is SP model, so it shall has customize configuration file, so we might suggest you contact your ISP or local support to resolve your problem. Sorry for if cause you inconvenient.
  • Ansa
    Ansa Posts: 44  Freshman Member
    Hi YSI,

    Maybe you could try
  • Johan
    Johan Posts: 27  Freshman Member
    I would also recommend you double check that the camera(s) has default gateway set properly. This caused me some headache once when performing NAT/Port forwarding.

Consumer Product Help Center