copy modified apcupsd conf at startup
Options
nasigormk
Posts: 1 Freshman Member
hi MIjself
My unit is NAS326 it has FFP and ENTware works without problem
i want to make the script which copy ethernet apc network configuration from
cp /opt/etc/apcupsd/apcupsd.conf and put it on original /etc/apcupsd/ folder restart and works ,i need this because original firmware has been locked this feature .
i made executable .sh code but dont know where to put it
So the unit can shutdown without tweaks tools use network from the card APC 9617
I have no idea how thanks for the help
Regards
Igor
#NAS_Oct_2018
#NAS_Oct_2018
0
All Replies
-
i made executable .sh code but dont know where to put it/opt/etc/init.d/, then it will be executed on start of Entware-ng. It is possible that you'll have to send a HUP signal, or restart apcupsd, as I don't know if it's already running by then.
0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 86 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 915 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 419 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight