No DSL connect with VMG1312-B30A
Andreas
Posts: 1
Hello,
if I connect a Fritz!Box to my DSL plug I get a connection with these information:
VDSL2 17a G.Vector (ITU G.993.5)
If I try the same with the VMG1312-B30A, using the same cables I do not get a connection at all. The Monitor shows xDSL state "Training" for a while and then it shows "Idle". I never get a conenction.
My firmware is 1.00 (AAEB.4)
I use the original configuration without any modifications (bridge mode)
Can anyone give me a hint what to do to connect the VMG1312-B30A successfully?
#CPE_Jan_2019
if I connect a Fritz!Box to my DSL plug I get a connection with these information:
VDSL2 17a G.Vector (ITU G.993.5)
If I try the same with the VMG1312-B30A, using the same cables I do not get a connection at all. The Monitor shows xDSL state "Training" for a while and then it shows "Idle". I never get a conenction.
My firmware is 1.00 (AAEB.4)
I use the original configuration without any modifications (bridge mode)
Can anyone give me a hint what to do to connect the VMG1312-B30A successfully?
#CPE_Jan_2019
0
All Replies
-
Hi Andreas,
Please refer to the below link for the user guide.
https://www.zyxel.com/support/DownloadLandingSR.shtml?c=gb&l=en&kbid=M-01086&md=VMG1312-B10A
You can find chapter 6 for WAN side connection setting, then check if your current setting can fulfill the environment.
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight