Where are the places to configure static IP on Access Points?
Options
Zyxel_Dean
Posts: 237 Zyxel Employee
Where are the places to configure static IP on Access Points?
To configure static IP on APs, there are a few places and methods for you to do so.
Local configuration
Here are some ways to configure static IP under LAN
1. Web GUI
You can access the AP web GUI by typing the IP of the NAP (If DHCP server exist in the network), or by the default IP 192.168.1.2 .
The default account and password are admin/1234
Go to Configuration > Network > IP setting, you will be able to configure static IP and VLAN
2. ZON Utility
You can download Zyxel ONE Network Utility from our official website to configure the static IP locally.
DL link:Zyxel ONE Network Utility
After installing, open the application and checkbox the device and press the top left button for configuration.
It will require you to type admin password, which the default is 1234 if not yet registered to NCC.
Through Nebula Control Center
If your device is already online and wish to configure, go to Device > Access point > select an AP and click the edit button of the status frame.
Should you now be able to configure Static IP through multiple ways.
To configure static IP on APs, there are a few places and methods for you to do so.
Local configuration
Here are some ways to configure static IP under LAN
1. Web GUI
You can access the AP web GUI by typing the IP of the NAP (If DHCP server exist in the network), or by the default IP 192.168.1.2 .
The default account and password are admin/1234
Go to Configuration > Network > IP setting, you will be able to configure static IP and VLAN
2. ZON Utility
You can download Zyxel ONE Network Utility from our official website to configure the static IP locally.
DL link:Zyxel ONE Network Utility
After installing, open the application and checkbox the device and press the top left button for configuration.
It will require you to type admin password, which the default is 1234 if not yet registered to NCC.
Through Nebula Control Center
If your device is already online and wish to configure, go to Device > Access point > select an AP and click the edit button of the status frame.
Should you now be able to configure Static IP through multiple ways.
Tagged:
0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 79 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 909 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight