-
How to disable certain AP's LAN port access?
Scenario: In an enterprise environment, there might be a need to prevent users from connecting cables to an AP’s LAN port by disabling the LAN port to restrict unauthorized access to the intranet network., especially for specific managed APs deployed in public areas. Following the below steps, you can manually disable…
-
How to customize PVID and allow-VLANs for specific AP LAN port?
Following the below steps, you can customize the PVID and allow VLAN for specific Nebula-managed APs according to your requirements. Navigate to Nebula >> Configure >> Access points >> AP & port settings Scroll down the page to the AP list part, and single tap on the AP which you want to configure the specific PVID/Allow…
-
How to check if AP no LED light up?
If you notice that the LED on your Access Point is not lighting up, there's a straightforward process to diagnose and resolve this issue. Firstly, access the Nebula Control Center by navigating to Nebula >> Configure >> Access Points >> General Settings Here, check if the "LED lights" option is enabled. If it's turned off,…
-
How to prevent Repeater APs from connecting to specific AP?
You can take two different approaches to prevent your repeater AP from connecting to an unexpected AP: Approach 1: Force the repeater AP to connect to a specific AP by following the steps in the link: Approach 2: Disable the "Downlink" feature in the per-AP Smart Mesh settings to avoid any repeater from connecting to this…
-
How Can I Force My Repeater AP to Connect to the Root AP Using a Specific Band?
To force your repeater AP to connect to the root AP using a specific band, follow these steps: Navigate to the Devices » Access points" page on Nebula. Locate and click on the specific repeater AP that you want to configure. In the status section of the AP settings, you will find the "Smart Mesh" option. Click the "Edit"…
-
How Can I Make My Repeater AP Connect to a Specific Uplink AP?
To make your repeater AP connect to a specific uplink AP, follow these steps: Navigate to the Devices » Access Points" page. Locate and click on the specific repeater AP that you want to configure. In the status section of the AP settings, you will find the "Smart Mesh" option. Click the "Edit" icon to access further…
-
How to set up Smart Mesh for specific Managed APs?
To set up Smart Mesh for a specific managed AP, follow these steps: Navigate to Devices » Access Points page on Nebula. Locate and click on the specific AP to set up Smart Mesh. In the status section of the AP settings, you will find the "Smart Mesh" option. Click the "Edit" icon to access further configuration options for…
-
How to set up Load Balance Group on Nebula?
What is Load Balance Group? To attempt to lessen the loading of one channel by deploying additional access points in dense areas, administrators must enable load balancing for AP clusters to improve equal channel usage. Since AP clusters may be deployed among different rooms, it is a good idea to define their respective…
-
[Nebula] How to set up Load Balance on Nebula?
What is Load Balance? How could it work? To avoid big amount of client connect to
the same AP bring high loading and cause impact (The wireless performance
decreases if the loading of AP is too heavy, the more clients connecting to the
same AP, the less bandwidth each device can get), load balance feature setup
help to…
-
What is the meaning of the AP status with an orange icon and “Client Overloading” description?
On Nebula, users could determine the status
of the AP from the icon in the AP list. What does the orange icon with the “Client
Overloading” description mean? AP with this status base on the reason below : When the user has
configured the Load Balance feature, the connection amount reaches the value
from the corresponding…
-
[Nebula] How to configure Ethernet NAT on WAC500H?
Function
description: The WAC500H is able to act as a router and
DHCP Server for LAN clients. The AP share the same DHCP pool as NAT mode SSID
with below definition. - Client can get IP from DHCP
pool 10.0.0.0/8 or 172.16.0.0/12. Range (10.0.0.2-10.255.255.254) or (172.16.0.2-172.31.255.254) Gateway and DNS
address is…
-
What does the LED status stand for on my Access-Point?
We often get questions regarding the LED status on our customers
Access-points and their respective interpretation/meaning. These are normally
in full detail depicted in the user-guide and also a document at Nebula > Help
> Online documents > Nebula Device Startup LED Guide. In LED-Status Access Points, which basically is…
-
[Nebula] How to configure the AP LAN provision?
Where to find: Configure > Access point > AP & port settings > Port setting Function description: This screen allows you to enable or disable a port on the managed AP and configure the port's VLAN settings. The port settins apply to all Nebula APs that are assigned to the site and have one or more than on Ethernet LAN…
-
Where are the places to configure static IP on Access Points?
Where are the places to configure static IP on Access Points? To configure static IP on APs, there are a few places and methods for you to do so. Local configuration Here are some ways to configure static IP under LAN 1. Web GUI You can access the AP web GUI by typing the IP of the NAP (If DHCP server exist in the…
-
LED Indication Guide for NAP303
LED Indication Guide for NAP303 A guide for those who want to know what the LEDs represent and blinking patterns indicate on NAP303 LED of NAP303 Explaination of NAP303 LED and Patterns
-
LED Indication Guide for NAP203
LED Indication Guide for NAP203 A guide for those who want to know what the LEDs represent and blinking patterns indicate on NAP203 LED locations on NAP203 Explaination of NAP203 LED and Patterns
-
LED Indication Guide for NAP102
LED Indication Guide for NAP102 A guide for those who want to know what the LEDs represent and blinking patterns indicate on NAP102 LED of NAP102 Explaination of NAP102 LED and Patterns