A problem with Zyxel LTE5366-M608

maxg5
maxg5 Posts: 1
edited January 4 in Mobile Broadband
I bought a router Zyxel LTE5366-M608
I installed a sim card in the router. Only LTE network mode is turned on. Signal 4 divisions.
The problem is that every 3-5 minutes Internet access is lost. Helps restart the router.
Maybe something with the settings of the router?
 What could be my problem?
Here is the log of the router:
607	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: Mask = 255.255.255.000 (ffffff00) - aka /24
608	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: IP range start = 192.168.1.1
609	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: IP range end = 192.168.1.254
610	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: DHCP Server IP pool start = 192.168.1.33
611	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: DHCP Server IP pool end = 192.168.1.64
612	Apr 24 22:51:50	commander/change_dhcpd_ip_pool: DHCP Server IP pool OKOK!!
613	Apr 24 22:51:50	commander: Start dnsmasq at nf_handle_dhcpsrv
614	Apr 24 22:51:50	udhcpd[21328]: Received a SIGTERM
615	Apr 24 22:51:55	MultiWANChk2: nat is restarting, skip checking
616	Apr 24 22:51:56	syslog: server_config.pool_check = 1
617	Apr 24 22:51:56	syslog: start = 192.168.1.33, end = 192.168.1.64, lan_ip = 192.168.1.1, interface=br0, ifindex=0
618	Apr 24 22:51:57	udhcpd[26022]: udhcpd (v0.9.9-pre) started
619	Apr 24 22:51:59	NAT/conntrack: flush start
620	Apr 24 22:52:00	MultiWANChk2: nat is restarting, skip checking
621	Apr 24 22:52:01	commander: WARN: NAT already running
622	Apr 24 22:52:04	NAT/conntrack: flush end
623	Apr 24 22:52:05	commander: handle_nat: nat restart
624	Apr 24 22:52:10	MultiWANChk2: nat is restarting, skip checking
625	Apr 24 22:52:11	NAT/conntrack: flush start
626	Apr 24 22:52:15	MultiWANChk2: nat is restarting, skip checking
627	Apr 24 22:52:16	NAT/conntrack: flush end

#SP_Apr_2019

Consumer Product Help Center