Vlan GS1920

Options
Paulo
Paulo Posts: 1
edited August 2022 in Switch
Vlan.jpg

I have two GS1920 switchs and I am trying to segregate into 3 seperate vlans. The vlans have been created on a GS1920, I have 2 DHCP servers från differents routers. I wish to connect the router to the switch along a single port (24) in the switch and then send it to from port (4) to another switch port (2) which should accept both DHCP. They should no see each other Lan !

Thanks,

Comments

  • Zyxel小編 Lucious
    Zyxel小編 Lucious Posts: 278  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    Options

    Hi @Paulo


    Welcome to Zyxel community!

    First, I assume both of your routers can recognize VLAN tagged packets.

    Based on your scenario, you will need two different VLANs to separate the traffic.

    Here is a configuration example (using VLAN 2 & VLAN 11),

    2019-10-31_151632.jpg

    On GS1920-1,

    VLAN 2:

    fixed port 4,24

    tagged-out port 4,24

    VLAN 11:

    fixed port 4,12

    tagged-out port 4,12


    On GS1920-2,

    PVID 11 for port 3

    PVID 2 for port 4

    VLAN 2:

    fixed port 2,4

    tagged-out port 2

    untagged-out port 4

    VLAN 11:

    fixed port 2,3

    tagged-out port 2

    untagged-out port 3


    Zyxel_Lucious

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）