Guest Access through NWA 1123NI?

Joachim
Joachim Posts: 1  Freshman Member
edited May 21 in Wireless
How to implement a guest WiFi access with a simple standalone NWA 1123NI?
Router is a Draytek 2900, the access point is working flawlessly.
Customer wants a guest WiFi, that only talks to the router and prohibits contact to all other devices on the network.
Other access points have a simple setting for that, but not the NWA :-/
HELP!

Comments

  • livealive
    livealive Posts: 23  Freshman Member
    First Answer First Comment Friend Collector Second Anniversary

    As I know, NWA1123NI supports intraBSS blocking or layer2 isolation features are related to guest WiFi.

    Intra-BSS blocking prevents peeping from associated Wi-Fi clients under the condition that wireless clients are connected using the same AP and SSID. 

    Layer2 isolation is used to prevent wireless clients associated with your NWA from communicating with other wireless clients, APs, computers or routers in a network.

  • Zyxel_KathyLin
    Zyxel_KathyLin Posts: 58  Zyxel Employee
    First Answer First Comment Friend Collector

    @Joachim

    For the NWA1121-NI, you can create a new SSID with WAP2-PSK and enable layer 2 isolation. The guest connect the SSID is unable to connect the intranet device.

    Access the AP GUI and set the pass device in the layer 2 isolation white list.(must set gatway or router)

    layer 2 isolation.PNG

    Set the Security profile with password.

    security.PNG

    Set the SSID profile with the security profile.

    SSID.PNG

    Set the wireless setting

    wireless.PNG

    Change LAN setting and write the DNS server.

    lan.PNG

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）