IPSec VPN subnet Lan1 is not reachable
Freshman Member
i have two IPSec Connection - same gateway.
Both connections are absolut identical, only the local network (Subnet) is ...
- lan1-Subnet (192.168.10.0/24)
- vlan10-Subnet, based on lan1 (192.168.200.0/24)
If i connect to 2. Connection, everything is fine - can reach each device on vlan 10
Connecting to 1. connection, i can only reach the router itself, but no device on lan1.
0
Accepted Solution
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
All Replies
-
sorry, i have found the solution in my configuration.
the destination IPs (TPLink-Switches) are only reachable for admin, when source-ip is in VLAN1.
0
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 151 Nebula Ideas
- 98 Nebula Status and Incidents
- 5.7K Security
- 277 USG FLEX H Series
- 277 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 42 Wireless Ideas
- 6.4K Consumer Product
- 250 Service & License
- 395 News and Release
- 85 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.6K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 75 Security Highlight
