ZyWall 110 update from Firmware version v3.10 to 4.x
Hello there
We have a ZyWall 110 here, with firmware version V3.10(AAAA.2) on it..
1) Is it possible to update from v3.10 to v4.13? (that was the lowst version i found on the zyxel.com ftp srv)And after that i would update Version by Version as recommended or dons't that matter if version v4.13 or higher from v3.10
2) Is there a way to download the firmware version V3.10(AAAA.2)?
just in case something goes wrong with the firmware update and i have to go back to this version.
thanks in advance
0
Accepted Solution
-
Pat
The firmware has been private message to you. Please have a check.
Before upgrade the firmware, you need to backup the configuration first, and update by each version. Currently, the latest firmware is v4.60, but I suggest you should upgrade at least to v4.38.1
All Replies
-
Pat
The firmware has been private message to you. Please have a check.
Before upgrade the firmware, you need to backup the configuration first, and update by each version. Currently, the latest firmware is v4.60, but I suggest you should upgrade at least to v4.38.1 -
0
-
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 115 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 64 Switch Ideas
- 900 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 832 Nebula FAQ
- 402 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight