Log in to http://zyxelsetup

sveiniversen
sveiniversen Posts: 2  Freshman Member
edited March 2018 in Smart Home Product
Hello
I have used Exibel WRE6505 for a while without any problems.
But, now I have chanced my home nettwork and need to reconfigure Exibel.
I have tried to reset it as described in the documentation (hold wps button for 5 sec) and was hoping that would get me acces to log in on zyxelsetup, but no luck.

How do I log in again?

sveiniversen

#Repeater_March

All Replies

  • Lomprayah
    Lomprayah Posts: 24  Freshman Member
    Third Anniversary
    Hi

    Ensure you have connected to the WRE6505  network before you try to access zyxelsetup

    Anders
  • sveiniversen
    sveiniversen Posts: 2  Freshman Member
    Problem is I have reset the WRE6505  and don't know how to connect without login in. And I can't seem to log in... Sircular problem I guess.

  • Lomprayah
    Lomprayah Posts: 24  Freshman Member
    Third Anniversary
    i think the default user name is admin, and password 1234
  • Hummel
    Hummel Posts: 212  Master Member
    First Comment Friend Collector Third Anniversary
    edited March 2018
    @sveiniversen,

    Normally, you should be able to access the WebGUI via http://zyxelsetup
    Maybe you could try it with the following steps:
    1. Press and hold the WPS button for more than 5 seconds (no longer than 10 seconds). The power LED will start flashing.
    2. Connect your PC to the Ethernet port of WRE6505.
    3. Open your browser and access http://zyxelsetup
    4. If you are not able to access the WebGUI in step3, please try to assign a static IP address, 192.168.1.100 for example, to your network card.
    5. Try to access http://192.168.1.2 via the browser.
    Default username/password are admin/1234 as described in the User Guide.

    PS. Remember to change the static IP of your network card back to the original settings after you finish the configuration of WRE6505.

    Hope this method can help you to access the WebGUI of your WRE6505 successfully.

Consumer Product Help Center