can I configure QOS in GS1900 for multicast streams?
Options
All Replies
-
Hi @kevin,
You can use QoS setting on GS1900 with following steps.
1. Access the Switch via WebGUI.
2. Go to Configuration -> QoS -> General and choose the specific port (The port connected with stream server) to configure CoS Value to the priority you want. (Don't recommend to configure the highest priority 7 because priority 7 packet is usually reserved for the system packet.)
3. Go to Configuration -> QoS -> Trust Mode -> Port to configure port mode "Trust" on the port connected to stream server.
Then your stream should be set priority.
Ryan0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 79 Nebula Status and Incidents
- 5.1K Security
- 73 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 198 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight