Static routes are not saved

Voha
Voha Posts: 1  Freshman Member
edited June 2018 in Smart Home Product
My router is Keenetic Start
My firmware is 
NDMS    v2.05(AAKV.0)C7
I create static routes and its work fine. But after a reboot its do not available in the web interface and don't work. Although they are stored in startup-config and running-config :
ip route 10.0.0.0 255.0.0.0 192.168.9.1 ISP auto 1
ip route 78.111.186.0 255.255.255.0 192.168.9.1 ISP auto 1
ip route 192.168.9.0 255.255.255.0 192.168.9.1 ISP auto 1
If I do not specify an interface  ( ISP ) , the routes will enable in the web interface and will work after the reboot. How can I make the routes work after rebooting with the selected interface? 
#Others_June

All Replies

  • Zyxel_Kelly
    Zyxel_Kelly Posts: 40  Freshman Member
    Hi Voha,

    In order to provide you with a better assistance, 
    I will contact you through private message,
    please check your message box. :)

Consumer Product Help Center