USG20W-VPN Wireless 2.4G and 5G band not working simultaneously
Options
How to configure Wireless to get both bands working simultaneously?
USG20W-VPN with firmware V4.30(ABAR.0) / 2017-11-23 21:23:44.
I have configured a wireless AP Profile for 802.11 b/g/n using the 2.4 GHz band and another profile for 802.11 ac using the 5 GHz band. I can get the 2.4GHz band to work, or I can the 5 GHz band to work, but I can't get both bands to work at the same time. I'm guessing that Idon't have things configured correctly. Is there an article that explains how to configure wireless so that both bands will work simultaneously?
Thank you!
0
Comments
-
Hello TChalmers,
For internal wireless, USG20W-VPN support one channel at one time.
Go to Configuration>Object>AP Profile>Radio, you will see the default profile is 2.4G channel, and default2 profile is 5G channel.
Go to Wireless>AP management>Select which channel and SSID profile you want to use
Charlie
0
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 74 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 334 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 198 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight