WRE2205 v2 Reset

gimbers
gimbers Posts: 3  Freshman Member
edited March 2019 in Smart Home Product
Hi All. I have three WRE2205 v2s here. One of them will reset by holding down the WPS button for 10 seconds. The other two will not, and seeing as I have no way of knowing their IP addresses, I can't login to them to reset them through the GUI. Help! Is there another way to factory reset them?

#Repeater_Mar_2019

All Replies

  • Ijnrsi
    Ijnrsi Posts: 254  Master Member
    Press WPS button 10 seconds is the way to reset, why not try on another 2 WRE?
    Here is the user manually.
    ftp://ftp2.zyxel.com/WRE2205_v2/user_guide/WRE2205 v2_1.00.pdf
  • gimbers
    gimbers Posts: 3  Freshman Member
    Thanks for the reply. I've already got the owners manual and, like I said, one will reset, but the other two won't.
  • Ijnrsi
    Ijnrsi Posts: 254  Master Member
    how about set up the static IP to your network card and try 192.168.1.2?
    or you can check your client list in your router to check if the both WREs received the IP address from your router, then you can use the IP address to access web interface.
  • gimbers
    gimbers Posts: 3  Freshman Member
    Thanks Ijnrsi. Tried both of those. 192.168.1.2 gets nowhere and my router is not giving them an IP address. I've put them in the bin!
  • Mel
    Mel Posts: 83  Ally Member
    Hi gimbers,
    Can you share how do you connect WRE2205 v2?
    Is WRE2205 v2 directly connect to your PC or ...?

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）