zyxel cloud

emau74
emau74 Posts: 53  Ally Member
First Anniversary Friend Collector
edited August 2019 in Personal Cloud Storage
Hello,
I have had problems since I switched to fiber changing modems;
practically I can't access the modem from outside the Zyxel cloud, the word "device not found" appears to me;
from the assistance I was told to enable in the UPNP modem but it was already enabled; then I was told to disable the proxy but to no avail.

the nas continues to say that UPnP is not enabled (fig.1) but on the modem it is enabled (fig.2)

how can I do?








#NAS_Aug_2019

Comments

  • NeAl
    NeAl Posts: 77  Ally Member
    First Anniversary
    edited August 2019
    What modem were you using before?

    Please check on the back of the modem if your "Home&Life Hub" actually is a Zyxel VMG8825 OR a Sercomm WD300: strangely enough, they share the same chassis and almost the same GUI, but it seems the Sercomm device suffers from a poor and bug-ridden firmware.


  • emau74
    emau74 Posts: 53  Ally Member
    First Anniversary Friend Collector
    before I used a fritz box;
    check the model tonight.
    thank you
  • emau74
    emau74 Posts: 53  Ally Member
    First Anniversary Friend Collector
    edited August 2019
    i confirm...is Sercomm WD300;
    i have solution?
  • NeAl
    NeAl Posts: 77  Ally Member
    First Anniversary
    I'm afraid the problem seems to be the sercomm modem :(
  • emau74
    emau74 Posts: 53  Ally Member
    First Anniversary Friend Collector
    but with zyxel  VMG8825 the problem is not there?
  • NeAl
    NeAl Posts: 77  Ally Member
    First Anniversary
    I think it should work (I have VMG8823).

Consumer Product Help Center