gs1900-8hp can´t activate DHCP
Options
hello Guys,
I try to activate DHCP in the settings of my GS1900-8HP
but after having chosen DHCP and pushing the button apply I cant access the system above the ip: 192.168.1.1
I need to restart the GS19... manually to get access again.
But the IPv4 is still static
can anybody help me?
Greetz philipp
#Biz_Aug_2019
I try to activate DHCP in the settings of my GS1900-8HP
but after having chosen DHCP and pushing the button apply I cant access the system above the ip: 192.168.1.1
I need to restart the GS19... manually to get access again.
But the IPv4 is still static
can anybody help me?
Greetz philipp
#Biz_Aug_2019
0
All Replies
-
Because you change GS1900's ip to DHCP and it should get the new ip address from DHCP server then you will not be able to login via 192.168.1.1 ip address.
Since switch was not saved the configuration that is why you can use 192.168.1.1 to access after GS1900 rebooted.
I suggest that you can download the ZON Utility to modify GS1900 ip and it also can detect the new ip address.
Here is the download link page:
https://www.zyxel.com/products_services/Zyxel-ONE-Network-Utility-ZON-Utility/
Enjoy it!
Ace0
Categories
- All Categories
- 383 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 75 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 890 Nebula FAQ
- 415 Security FAQ
- 233 Switch FAQ
- 203 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight