NAS540: Volume down, repairing failed, how to restore data?
Options
All Replies
-
Here it is, sir :~ # e2fsck -n /dev/md2e2fsck 1.42.12 (29-Aug-2014)Warning! /dev/md2 is in use.ext2fs_open2: Bad magic number in super-blocke2fsck: Superblock invalid, trying backup blocks...e2fsck: Bad magic number in super-block while trying to open /dev/md2The superblock could not be read or does not describe a valid ext2/ext3/ext4filesystem. If the device is valid and it really contains an ext2/ext3/ext4filesystem (and not swap or ufs or something else), then the superblockis corrupt, and you might try running e2fsck with an alternate superblock:e2fsck -b 8193 <device>ore2fsck -b 32768 <device>0
-
Good news!
I finally have my data back!
I tried to recover the superblock index with e2fsck using backups listed, but none of them worked
So I decided to come back to the old plan and try again logical devs combinations.
The procedure I followed is this one : 1) Deactivating the volume with vgchange -an 2) Stop md2 3) Create array with new combination
And when I arrived at C / B / D / A and rebooted, NAS is finally gives my data back.
I'm really happy now, thanks to everyone involved.
Good Luck and all the best!
0 -
Thanks ksr7. Your response helped me.0
Categories
- All Categories
- 434 Beta Program
- 2.7K Nebula
- 174 Nebula Ideas
- 117 Nebula Status and Incidents
- 6.1K Security
- 418 USG FLEX H Series
- 297 Security Ideas
- 1.6K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 43 Wireless Ideas
- 6.7K Consumer Product
- 269 Service & License
- 416 News and Release
- 87 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.1K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 87 Security Highlight