hi, trying to set up NWA1123 -ACv2 no connection, blinking amber and green
Options
sangun
Posts: 1
attempting to set up AP, when power is connected continually blink amber and green. what am I doing wrong?
0
All Replies
-
@sangun
The blinking LED means AP is trying to discover our Nebula Controller Center(even after finishing booting up), so don't worry about the LED status. AP still allows user to access it's Web GUI for set up configurations.
For easy setup, I recommend you to use our utility "ZON" to access the AP's web GUI.
Just simply connect your PC/Laptop to AP's port, and run the utility, you'll see your AP got scanned and listed. Then you can keep configuring your devices either on the utility directly or through the Web GUI.
(Download Link: https://www.zyxel.com/products_services/Zyxel-ONE-Network-Utility-ZON-Utility/)
Best Regards,
Richard0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 51 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 63 Security Highlight