LTE3302 firmware update failure
MarkoP
Posts: 1
I tried to upgrade firmware of my Zyxel LTE3302 modem but it obviously failed. When I switch power on, all the leds (exceptb battery) are blinking very fast. Connecting with web browser to 192.168.1.1 does not work. How to get firmware re-installed?
0
All Replies
-
Hi MarkoP , please follow below instructions to recover your device.
1)You can check cmd window on your PC to see if PC get IP 192.168.123.x and default gateway 192.168.123.254
2)Access http://192.168.123.254 to re-upgrade your firmware again.
Please don't power off device and don't unplug Ethernet cable during firmware upgrading.
You can get LTE3302-M432 firmware 1.00(ABKQ.1)C0 from below download link.
https://www.zyxel.com/support/download_landing/product/lte3302_series_13.shtml?c=gb&l=en&pid=20171011104850&tab=Firmware&pname=LTE3302%20Series
0
Categories
- All Categories
- 415 Beta Program
- 2.3K Nebula
- 141 Nebula Ideas
- 94 Nebula Status and Incidents
- 5.6K Security
- 221 USG FLEX H Series
- 266 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 39 Wireless Ideas
- 6.3K Consumer Product
- 244 Service & License
- 383 News and Release
- 81 Security Advisories
- 27 Education Center
- 8 [Campaign] Zyxel Network Detective
- 3.1K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 84 About Community
- 71 Security Highlight