Zyxel NSA325v2 USB drive availability/mount
Options
All Replies
-
Can't answer, always gives me error.0
-
I have three disks attached to the NAS, if I do cat /proc/mounts, they seem to be here:/dev/sde1 /e-data/a35de5893a858e7a94bbbee375814f29
/dev/sdc1 /e-data/4b057828951167c27e50544d8404a891
/dev/sdd1 /e-data/c951f3cc780eb9ae37e5dd1e6b11013cBut don't know how to translate it to auto-mounting (because all of them are unmountd0 -
Didn't work; I booted and WD still not detected until I enter configuration page
0 -
I have three disks attached to the NAS, if I do cat /proc/mounts, they seem to be here:/dev/sde1 /e-data/a35de5893a858e7a94bbbee375814f29 tntfs rw,relatime,uid=99,gid= 0,umask=00,nls=utf8,case_sensitive,nocache,errors=continue,mft_zone_multiplier=1 0 0/dev/sdc1 /e-data/4b057828951167c27e50544d8404a891 tntfs rw,relatime,uid=99,gid= 0,umask=00,nls=utf8,case_sensitive,nocache,errors=continue,mft_zone_multiplier=1 0 0/dev/sdd1 /e-data/c951f3cc780eb9ae37e5dd1e6b11013c tntfs rw,relatime,uid=99,gid= 0,umask=00,nls=utf8,case_sensitive,nocache,errors=continue,mft_zone_multiplier=1 0 0
But don't know how to translate it to auto-mounting (because all of them are unmountd0 -
When the disks show up in /proc/mounts, they are mounted. But apparently they are not shared. Do the mounts show up in /etc/samba/smb.conf?
0 -
I think they do:[Series]path = /i-data/2dc65cad/PelÃculasguest ok = yesfollow symlinks = yesstrict allocate = yesvfs objects = recyclerecycle:repository = recyclerecycle:exclude = .test.permission.file.*recycle:directory_mode = 0777recycle:subdir_mode = 0777recycle:keeptree = yesrecycle:versions = yesrecycle:touch = yesrecycle:touch_mtime = norecycle:maxsize = 0[Disco 9-WD]path = /e-data/4b057828951167c27e50544d8404a891guest ok = yesfollow symlinks = nostrict allocate = no; NO Action-log or Recycle-Bin[Disco 7-S]path = /etc/zyxel/storage/sysvol/.system/autoshare_sata/Disco 7-Svalid users = "admin"follow symlinks = yesstrict allocate = yes; NO Action-log or Recycle-Bin[Disco 0-L]path = /etc/zyxel/storage/sysvol/.system/autoshare_sata/Disco 0-Lvalid users = "admin"follow symlinks = yesstrict allocate = yes; NO Action-log or Recycle-Bin0
-
Edit: this is after entering config page (didn't remember I already did it). If I don't enter this page, "Disco9-WD" (WD disk) doesn't appear.0
-
There is a striking difference between "Disco9-WD" and the other two:path = /e-data/4b057828951167c27e50544d8404a891path = /etc/zyxel/storage/sysvol/.system/autoshare_sata/Disco 7-Spath = /etc/zyxel/storage/sysvol/.system/autoshare_sata/Disco 0-L
Only the Disco9-WD share points to the mountpoint. The other to point to something else. A symlink to the mountpoint, probably. Did you configure the disks differently? The credentials are different too.
1 -
Sorry for being delayed, but the change in the forum made me lose the thread.
I tried to reset the nas (I thought it wouldn't lose the info), and now I can't access my previous folders anymore; restored the settings backup and now I can access one of the disks, but not the other.
I am trying to recover the info with easeus data recovery, but is it not any way to access previous files and folders?
0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 86 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 916 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 419 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight