[NEBULA] NSG VPN support behind NAT?
Options
Hey,
I have 2 NSG100. 1 site is behind the NAT but I can't build-up the VPN tunnel... Is this scenario supported?
If yes, how to configure that?
Here's my topology:
site1: NSG100 with Public IP <--> Internet <--> Router <--> site 2: NSG100 with Private IP
I have 2 NSG100. 1 site is behind the NAT but I can't build-up the VPN tunnel... Is this scenario supported?
If yes, how to configure that?
Here's my topology:
site1: NSG100 with Public IP <--> Internet <--> Router <--> site 2: NSG100 with Private IP
0
Accepted Solution
-
Hi ChaCha
Yes, it's supported. Following the path Gateway > Configure> Site-to-site VPN you will find the configuration for NAT Trasversal, you need to input the public IP address your Router is using. As well as, you need to be sure that the NSG100 is mapped in your "Router" device.5
All Replies
-
Hi ChaCha
Yes, it's supported. Following the path Gateway > Configure> Site-to-site VPN you will find the configuration for NAT Trasversal, you need to input the public IP address your Router is using. As well as, you need to be sure that the NSG100 is mapped in your "Router" device.5 -
But you can't do that, because it is in use by your router. Seems can only be done with a different external ip. Or Native Interface. Or a different cloud router.
0
Categories
- All Categories
- 385 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 75 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 908 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 886 Nebula FAQ
- 415 Security FAQ
- 228 Switch FAQ
- 200 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight