Feature request: WIFI connection status (type)

[Deleted User] · October 2020

I currently have the NWA110ax implemented at my home office. I use Nebula for the management of the device. It is possible to see the device capabilities in Nebula but not if the device is actually using WIFI 5 or WIFI 6 on a certain band. It would be very helpful if Nebula could inform me about this (both the web interface as well as the app).

MDL · March 2021

I agree with Atheon. This would be a nice feature to have on the NWA110ax.

Zyxel_Bella · March 2021

Hi @Atheon and @MDL

Thanks for the ideas!

In the Access point > Monitor > Clients page, selet the Band and Capability to display.

Image: https://us.v-cdn.net/6029482/uploads/editor/f2/zzcmiyy43h9d.jpg

Then you can check the detailed information about clients connected to AP.

Image: https://us.v-cdn.net/6029482/uploads/editor/6k/ki14kxzp656n.jpg

Regards,
Bella

[Deleted User] · March 2021

Dear Bella,

Thank you for your reply.

Capability does not mean that the device is actually connected using WIFI 6. It only means that the device is *capable* of doing that. I would like to see the actually used standard.

In your screenshot: devices are not connected using WIFI b/g/n. Those are three supported standards by the device. The device is connected using one of them and I would like to know which one.

Regards,

Atheon

Zyxel_Bella · March 2021

Hi @Atheon,

Thanks for the description of your expectation.

We’ll discuss the suggestions for improvement.

Regards,

Bella

Feature request: WIFI connection status (type)

All Replies

Categories

Nebula Tips & Tricks

Nebula Help Center